|
||||
600-700/800-900 MHz Outdoor Diplexer | DPO-6789B-D-x2 | |||
|
Overview
CCI’s Outdoor Diplexer combines 600/700 MHz band and 800/900 MHz band base stations onto a common feeder line. Specifically intended for use in dual band systems, the diplexer reduces the number of required feeder lines while providing a high degree of isolation between systems. By reducing the number of feeder lines, the cost to upgrade a site is reduced. Additionally, diplexers can be utilized in “crowded” sites where feeder lines are not easily accessible. Optional unit with two Diplexers mounted on a single bracket is available. Technical Description: The CCI Outdoor Diplexer provides full band performance in each band with low insertion loss, low Intermodulation, high isolation and high power handling. Excellent return loss and low insertion loss delivers an excellent match to antennas and base station, saving precious transmitter power. The fully weatherproof tower mount unit has DC/AISG pass through Smart DC with full autosense DC capability, which allows DC/AISG pass through in both the combine and split paths. The diplexer housing is constructed from die cast aluminum and consists of an IP67 moisture proof enclosure, with IP67 immersion proof connectors suited to long-life masthead mounting. The diplexer can be pole or wall mounted with the included bracket. The RF ports are configured with 4.3-10 connectors. CCI filter and combiner products are designed and produced to ISO 9001 certification standards for reliability and quality at our state-of-the-art engineering and manufacturing facilities. |
Electrical
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | Common | 617 - 798 | 18 dB minimum, 20 dB typical |
824 - 960 | 18 dB minimum, 20 dB typical | ||
600/700 | 617 - 798 | 18 dB minimum, 20 dB typical | |
800/900 | 824 - 960 | 18 dB minimum, 20 dB typical | |
Insertion Loss | COM to 600/700 | 617 - 798 | 0.2 dB typical, 0.5 dB max |
COM to 800/900 | 824 - 960 | 0.3 dB typical, 0.6 dB max | |
Isolation | COM to 600/700 | 824 - 960 | 50 dB minimum |
COM to 800/900 | 617 - 798 | 50 dB minimum |
General Characteristics | |
Impedance | 50 ohms |
Continuous Average Power | 200 W max. per input port simultaneous |
Peak Envelope Power | 2 kW max. per input port simultaneous |
Intermodulation Performance(all ports) | <-117dBm (-160 dBc) typical (2 × +43 dBm tones) all bands |
DC/AISG | |
Smart DC | DC path is automatically determined, when the unit is used as a combiner or splitter |
Combine mode standard priority* | 1. 617 - 798 MHz 2. 824 - 960 MHz *Customer can request a different priority at time of purchase |
Combine Path Operation | The port with DC voltage (7 - 30 V) is automatically passed to the COMMON Port. If more than one port has DC voltage present, the port with the highest priority is passed. If a short circuit is detected on the COMMON Port DC/AISG is disabled for the entire unit. |
Split Path Operation | DC/AISG pass through will be disabled for all ports where a short circuit is detected and DC/AISG will be passed to all other ports. |
DC Bypass Power-Up to Operating Time | <100 ms |
Current Consumption @ voltage | 35 mA typical, 50 mA maximum (7.0 to 30 VDC) |
Current (Single Path) | 2.5 A maximum |
Current Common | 2.5 A maximum |
AISG signal | 2.176 MHz, per AISG 2.0 |
Mechanical
Model | Single | Twin |
Connectors | 3 × 4.3-10 female | 6 × 4.3-10 female |
Dimensions w/Bracket (HxWxD) | 10.47 × 9.45 × 2.87 in. (266 × 240 × 73 mm) |
11.1 × 9.45 × 5.43 in. (282 × 240 × 138 mm) |
Housing Dimensions (HxWxD) | 10.47 × 5.63 × 2.36 in. (266 × 143 × 60 mm) |
10.47 × 5.63 × 4.92 in. (266 × 143 × 125 mm) |
Weight | 7.9 lbs (3.6 kg) | 15.4 lbs (7.0 kg) |
Frontal Wind Load @ 150 km/hour | 172.6 N (38.8 lbs) | 172.6 N (38.8 lbs) |
Lateral Wind Load @150 km/hour | 25.8 N (5.8 lbs) | 51.6 N (11.6 lbs) |
Mounting | Pole/Wall mounting bracket | Pole/Wall mounting bracket |
Outdoor Diplexer Outline Drawing | |
Outdoor Twin Diplexer Outline Drawing |
Accessories
SCU-AISG2-3 | AISG 2.0 Site Controller |
RET-CBK | AISG Cable Kit |
BT-0723-DMDF-AG-O | DIN-Male RF Port, DIN-Female RF+DC+AISG Port |
BT-0723-DFDM-AG-O | DIN-Female RF Port, DIN-Male RF+DC+AISG Port |
BT-0723-DFDF-AG-O | DIN-Female RF Port, DIN-Female RF+DC+AISG Port |
Product Information
DPO-6789B-D-S2 Dimension Drawing | ||
DPO-6789B-D-T2 Dimension Drawing |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP67, IP68 |
|