| PiMPro Smart Series Characteristics |
| Transmitter |
Frequency Accuracy |
±1 ppm @ +23°C; Stability ±1 ppm -10°C to +55°C |
| |
Frequency Aging |
±1 ppm/yr |
| |
Frequency Step Size |
10 kHz |
| |
Power Resolution |
0.1 dB |
| |
Adjustable Power Range |
20 to 46 dBm × 2 (100 mW to 40 W × 2) |
| Receiver |
Residual Intermod Level |
-120 dBm (-125 dBm Typical) |
| |
Measurement Range |
-60 to -160 dBm |
| |
Noise Floor |
-136 dBm |
| |
Reverse Power Protection |
13 dBm (20 mW) contiuous |
| Measurement Mode |
Measurement Method |
One Port, Reverse PIM |
| |
Real Time PIM |
3rd & 5th PIM |
| |
Return Loss |
Measured in dB |
| |
PIM vs Time |
3rd & 5th PIM |
| |
PIM Location (PIMPoint) |
Distance in Feet or Meters with VP Settings |
| |
Distance to Fault/Cable Loss |
One Port Open-Short Calibration |
| |
RX Interference |
Receive Only Mode - Noise Floor Measurements |
| |
Noise Floor Measurement |
Up-Link noise level with TX off |
| |
Frequency Sweep |
Frequency Response |
| |
DAS Feature |
Low power single tone trasmit to evaluate connectivity and path losses, or external interference |
| Measurement Range |
Return Loss |
Directivity >20 dB; Resolution >0.1 dB |
| |
VSWR |
Measurement Range 9:1 to 1.1:1; Resolution >0.1 dB |
| |
Cable Loss |
Measurement Range 0 to 10 dB; Resolution >0.1 dB |
| |
Distance to Fault |
VSWR Range 17:1 to 1.02:1; RL Range 0 to 40 dB |
| System |
Battery |
>3 hours (Full Charge) |
| |
Power |
AC & DC (AC 90 - 256 V, 50 - 60 Hz) |
| |
Data Ports |
3 - USB 2.0, 1 - Ethernet LAN Port |
| |
Remote Control |
WiFi Enabled (802.11n) |
| Electrical |
Max Power Consumption |
<180 W |
| Mechanical |
Weight |
18.0 to 27 lbs. (8.5 to 12.5 kg.) (model dependant) |
| |
RF Output Connector |
7-16 DIN Female or 4.3-10 Female |
| |
Dimensions (W×H×D) |
16.5 × 15 × 8 in. (419 × 381 × 203 mm) |
| |
Operating Temperature |
-10 to 45°C, 14 to 113°F, 95% RH |
| |
Storage Temperature |
-30 to 60°C, -22 to 140°F, 95% RH |
Pattern Viewer
