The CCI Outdoor Broadband Triplexer combines the frequency ranges 555-960 MHz, 1695-2200 MHz, and 2305-2690 MHz onto a common port. Specifically intended for use in multi-band systems with limited feeder lines, this CCI Triplexer facilitates the addition of new technologies including LTE and new spectrum onto existing sites, while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and the total cost to upgrade a site is significantly reduced. An optional twin unit with two Triplexers mounted on a single bracket is also available.
The CCI Outdoor Triplexer provides full band performance for each band with low insertion loss, low Intermodulation, and high power handling. Excellent return loss delivers the best match to the antennas and base station, saving precious transmit power. The Triplexer enables full Remote Electrical Tilt (RET) and Tower Mount Amplifiers (TMA) capability by providing DC and AISG 2.0 compliant pass-through.

The Outdoor Broadband Triplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the 600/700/850/900 bands on port 1, the AWS/PCS bands on port 2, and the WCS/BRS bands on port 3 onto a common feeder line. The fully weatherproof tower mount outdoor Triplexer provides DC and AISG signal pass-through on any of the band specific ports, enabling power and control for TMA's & RET antennas. The Smart Bias-Tee architecture passes the DC and AISG carrier frequency from any one of the input ports to the common port while blocking the DC and AISG signals from being re-injected into the other input ports. The Triplexer has internal multi-strike lightning protection using a multi-stage surge protection circuit.
The unit has been designed to minimize insertion loss while maximizing isolation. Particular attention has been given to the intermodulation performance of the Triplexer to minimize any passive intermodulation products from occurring. The Triplexer housing is constructed from die cast aluminum and consists of an IP67 moisture proof enclosure, with IP67 moisture proof connectors suited to long-life masthead mounting. The Triplexer can be pole or wall mounted with the included bracket. The RF ports can be configured with either DIN 7-16 or 4.3-10 connectors.
CCI filter and combiner products are designed and produced to ISO 9001 certification standards for reliability and quality at our state-of-the-art engineering and manufacturing facilities.