Small Cell/Outdoor DAS Antennas

CCI Portal Login

CCI Customer Portal

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Small Cell ODA 65°x65° Antenna ODA65F-KE1A

                
       
       
         
  PI ODA65FKE1A front isometric PI ODA65FKE1A REAR  
  • One foot (0.3 m), multiband, four port antenna with a 65° azimuth beamwidth, covering 694-960 MHz and 1695-2690 MHz frequencies
  • Two wide high band ports covering 1695-2960 MHz and two wide low band ports covering 694-960 MHz in an extremely low profile and low weight antenna
  • Full Spectrum Compliance 694-960 MHZ / 1695-2690 MHz, including WCS and AWS-3 Frequencies and upcoming Band 14 Operations
  • The Low weight and Low profile of this panel antenna, makes this an ideal solution for Small Cell Densification deployments in urban and suburban environments
  • Ordering options for multiple mounting brackets, including simple wall mounting or Dual-Axis adjustment bracket (up to 45° of tilt). Which makes it ideal for mounting on utility, lighting and traffic poles
  • Exceeds minimum PIM performance requirements
  • Ordering options for 7/16 DIN connector or the new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connectors

Overview

 

The CCI multiband 65° x 65° array is a four port antenna Small Cell antenna, with two wide high band ports covering 1695-2690 MHz and two wide low band ports covering 694-960 MHz. The CCI 65° x 65° antenna provides 2x2 Multiple-input-Multiple-output (MIMO) across the low band and high band ports. The CCI 65° x 65° Small Cell antenna is an ideal choice for Microcells, Small Cell and oDAS densification deployments in urban and suburban environments where antenna size and count are restricted. The CCI 65° x 65° Small Cell antenna provides a fixed 0° EDT, across all frequencies.

CCI antennas are designed and produced to ISO 9001 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • Microcells and Small Cells in Urban, Suburban and other visually sensitive environments
  • Ideal for Macro to Small Cell Coverage Transition Zones
  • Outdoor Distributed Antenna Systems (oDAS), neutral host in venues, campuses and other outdoor coverage applications

Electrical

Ports 2 × Low Band Ports for 694-960 MHz
Frequency Range 694-806 MHz 824-896 MHz 880-960 MHz
Gain1 8.2 dBi 8.2 dBi 8.6 dBi
Gain (Average)2 7.9 dBi 8.0 dBi 8.4 dBi
Azimuth Beamwidth (-3dB) 70° 65° 59°
Elevation Beamwidth (-3dB) 79° 74° 68°
Electrical Downtilt
Front-to-Back Ratio @180° > 25 dB > 22 dB > 22 dB
Cross-Polar Discrimination (at Peak) > 24 dB > 20 dB > 18 dB
Cross-Polar Port-to-Port Isolation > 22 dB > 22 dB > 18 dB
Voltage Standing Wave Ratio(VSWR) < 1.6:1 < 1.6:1 < 1.6:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 80 watts 80 watts 80 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

 

Ports 2 × High Band Ports for 1695-2690 MHz
Frequency Range 1695-1880 MHz 1850-1990 MHz 1920-2180 MHz 2300-2400 MHz 2496-2690 MHz
Gain1 8.6 dBi 8.6 dBi 8.5 dBi 8.6 dBi 9.3 dBi
Gain (Average)2 8.5 dBi 8.4 dBi 8.4 dBi 8.4 dBi 9.0 dBi
Azimuth Beamwidth (-3dB) 57° 61° 64° 70° 61°
Elevation Beamwidth (-3dB) 62° 64° 68° 73° 60°
Electrical Downtilt
Front-to-Back Ratio @180° > 32 dB > 32 dB > 32 dB > 32 dB > 35 dB
Cross-Polar Discrimination (at Peak) > 28 dB > 28 dB > 28 dB > 26 dB > 26 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.75:1 < 1.75:1 < 1.75:1 < 1.75:1 < 1.75:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 80 watts 80 watts 80 watts 80 watts 80 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

Mechanical

Dimensions (L×W×D) 11.8×11.8×6.1 in (300×300×156 mm)
Survival Wind Speed > 125 mph (> 201 kph)
Front Wind Load 30 lbs (132 N) @ 100 mph (161 kph)
Side Wind Load 15 lbs (69 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 1.2 ft2 (0.1 m2)
Weight* 4.6 lbs (2.1 kg)
Connector 4 × 7-16 DIN female long neck or 4.3-10 Female
Wall Mount (fixed) 0.375 in (10 mm) diameter hardware recommended
Wall Mount Tilt 0.375 in (10 mm) diameter hardware recommended
Mounting Pole 2 to 4.5 in (5 to 11 cm)
* Weight excludes mounting
Bottom View ODA65F-KE1AA ODA65F-KE1AB
  PI ODA65FKE1AA Bottom PI ODA65FKE1AB bottom
 
Connector Spacing ODA65F-KE1AA ODA65F-KE1AB
  PI ODA65FKE1AA connectorspacing PI ODA65FKE1AB connectorspacing
Mounting Kit Views      
  PI ODA65FKE1A MBK09 back PI ODA65FKE1A MBK08 back PI ODA65FKE1A MBK08 MBC07 pole back
  MBK-09 MBK-08 MBK-08 with optional MBC-07

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
Az EL ODA65RKE1A AP 737 AZEL0 ODA65RKE1A AP 896 AZEL0
  737 MHz Azimuth with Elevation 0° 896 MHz Azimuth with Elevation 0°
Az EL ODA65RKE1A AP 1780 AZEL0 ODA65RKE1A AP 2542 AZEL0
  1780 MHz Azimuth with Elevation 0° 2542 MHz Azimuth with Elevation 0°
 

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
softwareicon Current Firmware

Parts & Accessories

ODA65F-KE1AA-K Antenna with 7-16 DIN connectors and MBK-09 non tilting wall mount
ODA65F-KE1AB-K Antenna with 4.3-10 connectors and MBK-09 non tilting wall mount
ODA65F-KE1AA-K1 Antenna with 7-16 DIN connectors and MBK-08 wall mount (adjustable tilt in both directions up to 45°)
ODA65F-KE1AB-K1 Antenna with 4.3-10 connectors and MBK-08 wall mount (adjustable tilt in both directions up to 45°)
ODA65F-KE1AA-K2 Antenna with 7-16 DIN connectors with MBK-08 and MBC-07 for pole mount (adjustable tilt in both directions up to 45°)
ODA65F-KE1AB-K2 Antenna with 4.3-10 connectors with MBK-08 and MBC-07 for pole mount (adjustable tilt in both directions up to 45°)
MBK-09 Fixed wall mount kit
MBK-08 Adjustable wall mount kit
MBC-07 Pole mount clamp for use with MBK-08

Standards & Compliance

Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Federal Communication Commission (FCC) Part 15 Class B, ISO 9001
 
ISO9001Logo RoHS CE logo
  Footer
              
     
     
       
 

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax