The CCI Outdoor Diplexer passes the AWS, AWS-3 and PCS bands covering 1695-2180 MHz on its low band input port and the full WCS and BRS bands which covers 2300-2690 MHz on its high band input port. The Diplexer combines the low band and high band signals on to a common port and is specifically intended for use in multi-band systems with limited feeder lines. The Diplexer facilitates the addition of new technologies including LTE to existing sites while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and significantly reduces the total cost to upgrade a site.
The CCI Outdoor Diplexer provides full band performance for each band with low insertion loss, low Intermodulation, and high 200 W per port power handling. Excellent return loss performance delivers the best match to the antennas and base station, saving precious transmit power. The CCI Diplexer enables full Remote Electrical Tilt (RET) and Tower Mount Amplifiers (TMA) control capability by providing DC and AISG 2.0 compliant pass-through on either input port using the Smart Bias-T.

The CCI Outdoor Diplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the AWS/AWS-3/PCS with the WCS-BRS bands on to a common feeder line. The fully weatherproof tower mount outdoor diplexer has internal multi-strike lightning protection using a multi-stage surge protection circuit.
The unit has been designed to minimize insertion loss while maximizing isolation. Particular attention has been given to the intermodulation performance of the diplexer to minimize any passive intermodulation products from occurring. The diplexer can be pole or wall mounted and the unit body is rated for IP67. All RF ports are DIN 7-16 connectors which are IP68 rated. The mounting kit is included with the unit as an accessory.
CCI filter and combiner products are designed and produced to ISO 9001 certification standards for reliability and quality at our state-of-the-art engineering and manufacturing facilities.