|
||||
Outdoor Broadband Diplexer | DIP-0721-O-AISG | |||
![]() |
|
Overview
The CCI Outdoor Broadband Diplexer passes the full 700/850/900 bands covering 694-960 MHz on its low band input port and the full DCS/PCS/AWS bands including AWS-3 covering 1695-2180 MHz on its high band input port. This Diplexer combines the low band and high band signals on the common port and is specifically intended for use in multi-band systems with limited feeder lines. The Diplexer facilitates the addition of new technologies including LTE and new spectrum including AWS-3 to existing sites while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and significantly reduces the total cost to upgrade a site. The CCI Outdoor Broadband Diplexer provides full band performance for each band with low insertion loss, low Intermodulation, and high power handling. Excellent return loss delivers the best match to the antennas and base station, saving precious transmit power. The CCI Diplexer enables full Remote Electrical Tilt (RET) and Tower Mount Amplifiers (TMA) control capability by providing DC and AISG 2.0 compliant pass-through on the high band port to the common port. Technical Description: The CCI Outdoor Broadband Diplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the 700/850/900 and DCS/PCS/AWS bands on a common feeder line. The fully weatherproof tower mount outdoor diplexer has DC block on the low band port and DC and AISG 2.0 signal pass-through on the high band port providing power and control for TMA's & RET antennas. The diplexer has internal multi-strike lightning protection using a multi-stage surge protection circuit. The unit has been designed to minimize insertion loss while maximizing isolation. Particular attention has been given to the intermodulation performance of the diplexer to minimize any passive intermodulation products from occurring. The diplexer can be pole or wall mounted and the unit body is rated for IP66. All RF ports are DIN 7-16 connectors which are IP68 rated. The mounting kit is included with the unit as an accessory. CCI filter and combiner products are designed and produced to ISO 9001 certification standards for reliability and quality at our state-of-the-art engineering and manufacturing facilities. |
Electrical Specification
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | Common | 694-960 | 18 dB min. 20 dB typ. |
1695-2180 | 18 dB min. 20 dB typ. | ||
700/850/900 | 694-960 | 18 dB min. 20 dB typ. | |
DCS/PCS/AWS | 1695-2180 | 18 dB min. 20 dB typ. | |
Insertion Loss | BTS to 700/850/900 | 694-960 | 0.1 dB typ., 0.2 dB max. |
BTS to DCS/PCS/AWS | 1695-2180 | 0.2 dB typ., 0.25 dB max. | |
Rejection | BTS to 700/850/900 | 1695-2180 | 60 dB min. |
BTS to DCS/PCS/AWS | 694-960 | 50 dB min. | |
Isolation | 700/850/900 to DCS/PCS/AWS |
1695-2180 | 50 dB min. |
694-960 | 50 dB min. |
General Characteristics | |||
Impedance | 50 ohms | ||
Continuous Average Power | 500 W max. (all ports) | ||
Peak Envelope Power | 2 kW max. (all ports) | ||
Intermodulation Performance(all ports) |
<-110 dBm (-153 dBc) typical (2× +43 dBm tones) all bands | ||
DC Pass Current/AISG Pass (700/850 to COMMON port) |
3A/AISG signal (2.176 Mhz) per AISG 2.0 |
Mechanical
Connectors | 3 × 7-16 DIN female long neck |
Dimensions - Single Unit(w/o brackets)(H×W×D) | 6.46 × 8.54 × 1.89 in. (164 × 217 × 48 mm) |
Dimensions - Single Unit(with brackets)(H×W×D) | 7.3 × 8.54 × 2.6 in. (185.4 × 217 × 66 mm) |
Weight with brackets | 5.5 lbs (2.5 kg) |
Mounting | Pole/Wall mounting bracket |
![]() |
|
Outdoor Broadband Diplexer Outline Drawing |
Accessories
SCU-AISG2-3 | AISG 2.0 Site Controller |
RET-CBK | AISG Cable Kit |
BT-0821-DMDF-AG-O | DIN-Male RF Port, DIN-Female RF+DC+AISG Port |
BT-0821-DFDM-AG-O | DIN-Female RF Port, DIN-Male RF+DC+AISG Port |
BT-0821-DFDF-AG-O | DIN-Female RF Port, DIN-Female RF+DC+AISG Port |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP66, IP68 |
|