DAS Trays & Conditioners

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      High Power Low PIM Load LDI-77-100-xx
                
       
       
         
  PI LDI77100xx V0.9 170303  
  • CCI's high power low PIM load support 100W across a wideband from 694 to 2700 MHz
  • Excellent return loss performance
  • Available with 7-16 DIN, and 4.3-10 Connectors
  • Modular, high reliability design
  • Designed for ultra low PIM performance
  • RoHS compliant
  • Optional 19 inch rack mount kit
  • Available heat shield for labratory applications and conditions

 

Overview

 

CCI’s high power low PIM load covers a broad frequency range from 694 to 2700 MHz, while delivering high power performance of up to 100 Watts. This load has excellent return loss performance. The unit is ideal for optimizing RF power distribution, which is often required for distributed antenna systems (DAS).

The extremely wide frequency range allows use with multiband and broadband antennas as well as leaky cable systems. The high power handling makes this load well-suited for use with wireless base stations. The load has been designed and constructed with minimal solder joints which assures the correct dissipative loss and enhances the overall reliability.

The attenuators can be wall mounted with the included bracket or rackmount in a single or twin configuration with the optional rack mount kit. The RF ports can be configured with either DIN 7-16 or 4.3-10 connectors.

CCI filter and combiner products are designed and produced to ISO 9001:2008 certification standards for reliability and quality at our state-of-the-art engineering and manufacturing facilities.

Electrical Specification

RF Parameter  
Frequency Range 694 - 2700 MHz
Return Loss ≤ -18 dB typ
General Characteristics  
Continuous Average Power 100 W
Peak Envelope Power 3 kW maximum
Impedance 50 ohms
Intermodulation Performance <-117 dBm (-160 dBc) min; (2 × +43 dBm tones)

Environmental Specification

Operating Temperature -10˚C to +65˚C
Enclosure IP20 Indoor rated
MTBF >500,000 hours
Lightning Protection 8/20us, ±20KA max, 10 strikes each, IEC61000-4-5

Mechanical Specification

Model LDI-77-100-F1 LDI-77-100-F2
Connectors DIN 7-16 Female × 2 4.3-10 Female × 2
Enclosure Dimensions 272 x 130 x 88 mm
(10.7 x 5.12 x 3.46 in.)
272 x 130 x 88 mm
(10.7 x 5.12 x 3.46 in.)
Dimensions w/ Wall Mount 352 x 134.5 x 110 mm
(13.9 x 5.3 x 4.33 in.)
352 x 134.5 x 110 mm
(13.9 x 5.3 x 4.33 in.)
Weight 3.0 Kg (6.6 lbs) 3.0 kg (6.6 lbs)

 

  OD LDI77100xx V0.9 170303
  High Power Low PIM Load with DIN Female Connector (LDI-77-100-F1) Outline Drawing

 

  OD BKTATIRMK V1.0 170301
  High Power Attenuator shown with Rack Mount Bracket Kit (BKT-HPPD-RM-K) Outline Drawing

Accessories

Rackmount Bracket Kit for Low PIM High Power Load, 19 inch   Optional
Heat Shield Kit for Low PIM High Power Load Optional
Wall Mount Kit Included

Parts & Accessories

LDI-77-100-F1 High Power, Low PIM 100 Watt Load with DIN 7-16 Female Connectors
LDI-77-100-F2 High Power, Low PIM 100 Watt Load with 4.3-10 Female Connectors
BKT-HPPD-RM-K Rackmount Bracket Kit for high power passive devices such as Low PIM Attenuator and Low PIM Load accommodates two units
HS-HPPD-K Heat Shield Kit for high power passive devices such as Low PIM Attenuator and Low PIM Load

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529 IP20

Certifications

Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax