Co-Siting Filters & Combiners

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Outdoor Broadband Triplexer TPX-192126
                
       
       
         
  TPX192126 FV  
  • Low Loss
  • Small, lightweight
  • Good Isolation
  • Good IM
  • Lightning protected
  • High reliability
  • Full PCS, AWS and WCS/BRS bands

 

Overview

 

 

Communication Components, Inc. Outdoor Broadband Triplexer combines Basestation Tx/Rx signals from PCS Band, AWS Band and WCS/BRS Band onto a common port.  Specifically intended for use in multi-band systems with limited feeder lines, the CCI Triplexer model TPX-192126 facilitates the addition of new technologies including LTE to existing sites while providing a high degree of isolation between systems.  By reducing the number of feeder lines, the cost to upgrade a site (tower loading, leasing and installation costs) is reduced.
The CCI Outdoor Broadband Triplexer provides full band performance for each band with low insertion loss,  low Intermodulation, and  high power handling.  Excellent return loss delivers the best match to the antennas and base station, saving precious transmit power.  DC and AISG pass-thru retains full RET and TMA capability utilizing CCI's AISG suite of products.

 

Technical Description:

The Outdoor Broadband Triplexer consists of multiple filters to combine (or divide) PCS, AWS, and WCS/BRS signals onto a common port.  This tower mount unit can be used as either a splitter or combiner to aggregate multiple bands on a common feeder line. All RF ports consist of DIN 7-16 connectors.  The fully weatherproof tower mount unit incorporates multiple options for DC and AISG 2.0 pass-thru. Pass-thru is available on the PCS RF path, the AWS RF path, both AWS & PCS RF paths or neither the AWS or PCS RF path to the common port of the Triplexer.  When utilized the DC/ASIG Signal pass-thru provides power to control Tower Mount Amplifiers (TMA's) & Remote electrical Tilt (RET) Antennas. The unit has internal lightning strike protection using a multi-stage surge protection circuit.
The filters have been designed to minimize insertion loss while maximizing isolation.  Particular attention has been given to the intermodulation performance of the Broadband Triplexer to minimize any passive intermodulation products from occurring.  All DIN Connectors are fully IP68 rated and the unit body is rated for IP66.

Electrical Specification

RF Parameters Ports Frequency(MHz) Specification
Return Loss Common 1850 - 1990 18 dB min., 20 dB Typ.
1710 - 1770, 2110 - 2170 18 dB min., 20 dB Typ.
2300 - 2690 18 dB min., 20 dB Typ.
PCS 1850 - 1990 18 dB min., 20 dB Typ.
AWS 1710 - 1770, 2110 - 2170 18 dB min., 20 dB Typ.
WCS/BRS 2300 - 2690 18 dB min., 20 dB Typ.
Insertion Loss PCS 1850 - 1990  0.2 dB typ.
AWS  1710 - 1770, 2110 - 2170 0.2 dB typ.
WCS/BRS   2300 - 2700  0.2 dB typ. 
Rejection PCS to AWS  or WCS/BRS 1710 - 1770, 2110 - 2170 50 dB min. 
2300 - 2690 50 dB min.
AWS to PCS or WCS/BRS 1850 - 1990 50 dB min.
2300 - 2690 50 dB min.
WCS/BRS to PCS or AWS 1850 - 1990 50 dB min.
1710 - 1770, 2110 - 2170 50 dB min.
General Characteristics  
Impedance 50 ohms
Continuous Average Power 300 W max.
Peak Envelope Power 3 kW max.
Intermodulation Performance(all ports) <-110 dBm (-153 dBc) typical (2 × +43 dBm tones) all bands
DC Pass Current/AISG Pass
(PCS/AWS to ANT port)
3A/AISG signal (2.176 Mhz) per AISG 2.0

Environmental Specification

Operating Temperature   -50˚C to +60˚C
Enclosure IP66 (Unit Body), IP68 (Connector)
MTBF >500,000 hours
Lightning Protection 8/20us, ±20KA max., 10 strikes per IEC61000-4-5

Mechanical Specification

Connectors   4 × 7-16 DIN female long neck
Dimensions single unit (body only)(H×W×D) 6.12 × 8.65 × 2.0 in. (155.5 × 219.5 × 51 mm)
Weight 6.6 lbs (3.0 kg)
Mounting Pole/Wall mounting bracket

 

  TPX192126 Outline
  Outdoor Broadband Triplexer Outline Drawing

Block Diagram

  TPX192126 BD
  Outdoor Broadband Triplexer Block Diagram

Accessories

   

Product Information

  
ibwave logo sm   VEX File

Parts & Accessories

TPX-192126-* Single Unit Outdoor Broadband Triplexer
   
Option (-*) Description 
-1 DC/AISG Pass thru PCS to COMMON, DC Block on AWS & WCS/BRS ports 
-2 DC/AISG Pass thru AWS to COMMON, DC Block PCS & WCS/BRS ports 
-3 DC/AISG Pass thru AWS to COMMON & PCS to COMON, DC Block on WCS/BRS ports 
-4 DC Block on all ports

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US
 
AISGLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax