PIMPro Accessories

CCI Portal Login

CCI Customer Portal

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      High Power Low PIM Load PP-AL-LOAD
                
       
       
         
  PP AK LOAD FV  
  • Low PIM Load operates over DC - 3000 MHz
  • High power operation (2 X 43.0 dBm)
  • 50 Ohm Impedance
  • Meets VSWR over 600 - 2700 MHz
  • Low PIM ≤-165 dBc (-122 dBm) Typical

Overview

 

The CCI PP-AK-LOAD Low PIM Load is intended for use in high performance PIM testing over a frequency range from DC to 3000 MHz.  The load is capable of handling 2 X 43 dBm signals of RF Power and has a VSWR of 1.2:1 maximum.  The Low PIM Load is supplied with a DIN-Male connector on one end and a DIN-Female connector on the other end.  This makes the Low PIM Load versatile as it can be utilized when connections of either sex are required.  Note that care should be taken to insure all mating surfaces are undamaged and kept clean and free of all debris.  

Electrical Specification

RF Parameters Ports Frequency(MHz) Specification
Operating Frequency Range  Input, Output DC - 3000 MHz  
VSWR (Return Loss) Input 600 - 2700 1.2:1 Max. (20.8 dB minimum)
Output 600 - 2700 1.2:1 Max. (20.8 dB minimum)
         
General Characteristics  
Impedance 50 ohms
Continuous Average Power 2 X 43 dBm (Minimum requirement for each test for five minutes, Meet the requirements of PIM at 900 MHz, 1800 MHz, 2100 MHz)
PIM <-122 dBm (-165 dBc) typical (2 X 43 dBm tones) all bands
Insulation Resistance > 1000 Megohms
Proof Voltage 1000 V

Environmental Specification

MTBF   >500,000 hours
Operating Temperature -40˚C to +85˚C

Mechanical Specification

Model PP-AK-LOAD
Connectors 1 × 7-16 DIN Female (Reference IEC60169-4)
1 x 7-16 DIN Male (Reference IEC60169-4)
Dimensions 9.08" (L) x 3.34" (Dia.)
(230.6 mm (L) × 84.85 mm (Dia.))
Dimensions (Across Flats) 3.07 in (78.0 mm)
Weight N/A

 

  PP AK LOAD Outline
  High Power Low PIM Load Outline Drawing

Accessories

   

Parts & Accessories

PP-AK-LOAD High Power Low PIM Load with 7-16 DIN Male and 7-16 DIN Female Connectors

Standards & Compliance

   

Certifications

ISO 9001
 
ISO9001Logo RoHS logo
  Footer
              
     
     
       
 

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax