Triplexers

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Broadband Triplexer Combiner TPX-192126A-xx
                
       
       
         
  TPX192126ARM FVTPX192126AXO FV  
  • Combines PCS (1850-1995), AWS (1695-2180) and WCS/BRS (2310-2690), which includes AWS-3
  • High power 60 W per port with low insertion loss
  • Low intermodulation with isolation of >50 dB per band
  • Optional DC and AISG 2.0 pass through on customer specified band
  • Available indoor rack mount or outdoor pole mount configurations
  • High reliability of >500K Hours MTBF and multi-strike lightning protection
  • Optional wall mount bracket available for indoor model

Overview

 

The CCI Broadband Triplexer combines three bands, PCS (1850-1995), AWS (1695-2180) and WCS/BRS (2310-2690) onto a common port. Specifically intended for use in multi-band systems with limited feeder lines, this CCI Triplexer facilitates the addition of new technologies including LTE and new spectrum including AWS-3 to existing sites while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and the total cost to upgrade a site is significantly reduced.
The CCI Broadband Triplexer provides full band performance for each band with low insertion loss, low Intermodulation, and high power handling. Excellent return loss delivers the best match to the antennas and base station, saving precious transmit power. The outdoor model of the Triplexer offers full Remote Electrical Tilt (RET) and Tower Mount Amplifiers (TMA) capability by providing multiple options for DC and AISG 2.0 compliant pass-through.

 

Technical Description:

The Triplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the PCS, AWS, and WCS/BRS bands on a common feeder line. The fully weatherproof tower mount outdoor triplexer is orderable with DC block on all ports or DC and AISG signal pass-through on any of the band specific ports. When configured with pass-through the Triplexer provides power and control for TMA's & RET antennas. DC and AISG signal pass-through is not available on the indoor rack mounted model. The triplexer has internal multi-strike lightning protection using a multi-stage surge protection circuit.
The unit has been designed to minimize insertion loss while maximizing isolation. Particular attention has been given to the intermodulation performance of the Triplexer to minimize any passive intermodulation products from occurring. The indoor model can be 19” rack mounted and the unit body is rated for IP20. An optional wall mount bracket is available for the indoor model. The outdoor model can be pole or wall mounted and the unit body is rated for IP67. On both models all RF ports are 7-16 DIN connectors which are IP68 rated. The respective standard mounting kits are included with each unit as an accessory.
CCI filter and combiner products are designed and produced to ISO 9001:2008 certification standards for reliability and quality at our state-of-the-art engineering and manufacturing facilities.

Electrical Specification

RF Parameters Ports Frequency(MHz) Specification
Return Loss Common 1850 - 1995 18 dB minimum, 20 dB typical
1695 - 1780 18 dB minimum, 20 dB typical
2110 - 2180 18 dB minimum, 20 dB typical
2310 - 2690 18 dB minimum, 20 dB typical
PCS 1850 - 1995 18 dB minimum, 20 dB typical
AWS 1695 - 1780 18 dB minimum, 20 dB typical
2110 - 2180 18 dB minimum, 20 dB typical
WCS/BRS 2310 - 2690 18 dB minimum, 20 dB typical
Insertion Loss COM to PCS 1850 - 1995 0.35 dB typical, 0.5 dB maximum
COM to AWS 1695 - 1780 0.35 dB typical, 0.5 dB maximum
2110 - 2180 0.35 dB typical, 0.5 dB maximum
COM to WCS/BRS 1850 - 1995 0.35 dB typical, 0.5 dB maximum
Isolation COM to PCS  1695 - 1780 50 dB minimum
2110 - 2180 50 dB minimum
2310 - 2690 50 dB minimum
COM to AWS 1850 - 1995 50 dB minimum
2310 - 2690 50 dB minimum
COM to WCS/BRS 1850 - 1995 50 dB minimum
1695 - 1780 50 dB minimum
2110 - 2180 50 dB minimum
       
General Characteristics  
Impedance 50 ohms
Continuous Average Power 60 W per input port maximum
Peak Envelope Power 1.2 kW max. (PCS, AWS), 650 W max. (WCS, BRS)
Intermodulation Performance <-112 dBm (-155 dBc) typical (2 × +43 dBm tones) all bands (Indoor & Outdoor)
<-127 dBm (-162 dBc) typical (2 × +35 dBm tones) all bands (Indoor & Outdoor)
DC Pass Current/AISG Pass
(PCS/AWS to ANT port)
3A/AISG signal (2.176 Mhz) per AISG 2.0 (Outdoor)

Environmental Specification

Operating Temperature   0˚C to +65˚C (Indoor) / -40˚C to +65˚C (Outdoor)
Enclosure Indoor IP20 (minimum) / Outdoor IP67 (Unit Body)
Connectors DIN 7/16 IP68
Relative Humidity 0 - 45 % (Indoor) / 0 - 99% (Outdoor)
MTBF >500,000 hours
Lightning Protection 8/20us, ±20KA max, 10 strikes each, IEC61000-4-5

Mechanical Specification

Indoor Rack Mount  
Connectors 4 × 7-16 DIN female long neck or 4 × 4.3-10 female
Enclosure Dimensions 1.73 in. × 10.24 × 8.30 (44.0 × 260.0 × 210.8 mm)
Overall Dimensions 9.34 × 19.00 × 1.73 in. (44.0 × 483.0 × 237.3 mm)
Weight 8.0 lbs (3.64 kg)
Mounting 19 inch (483 mm) x 1U (266 mm) rack or included wall mount bracket
Outdoor Pole Mount  
Connectors 4 × 7-16 DIN female long neck
Enclosure Dimensions 1.73 × 10.24 × 8.16 in. (44.0 × 260.0 × 207.3 mm)
Overall Dimensions 2.46 × 10.24 × 11.21 in. (62.5 × 260.0 × 284.8 mm)
Weight (w/o Bracket) 8.0 lbs (3.64 kg)
Mounting Pole/Wall Mount

 

  TPX192126ARM Outline
  Indoor Broadband Triplexer (TPX-192126A-RM) Outline Drawing
  TPX192126AXO Outline
  Outdoor Broadband Triplexer (TPX-192126A-X-O) Outline Drawing

Block Diagram

  TPX192126A BD
  Outdoor Broadband Triplexer (TPX-192126A-X-O) Block Diagram

Accessories

19 in. Rack Mountable (Indoor)   Included
Wall Mount Kit (Indoor) Option
Pole/Wall Mount Kit (Outdoor) Included

Parts & Accessories

TPX-192126A-RM 19 in. Indoor Rack Mount Triplexer with 7-16 DIN Connectors
TPX-192126A-RM-C2 19 in. Indoor Rack Mount Triplexer with 4.3-10 Connectors
MPW-01 Pole/Wall Mounting Kit for Select Filters and Amplifiers
TPX-192126A-RM-K 19 in. Indoor Rack Mount Triplexer with 7-16 DIN Connectors with Optional Wall Mount Bracket Kit
TPX-192126A-RM-C2-K 19 in. Indoor Rack Mount Triplexer with 4.3-10 Connectors with Optional Wall Mount Bracket Kit
   
TPX-192126A-X-O Outdoor Pole/Wall Mount Triplexer
   
Option (-X) Description
-0 No DC/AISG Pass thru
-1 DC/AISG Pass thru PCS to COMMON, DC Block on AWS, WCS/BRS ports
-2 DC/AISG Pass thru AWS to CLOMMON, DC Block on PCS, WCS/BRS ports
-3 DC/AISG Pass thru WCS/BRS to COMMON, DC Block on AWS, PCS ports
-S DC/AISG Pass thru on any port with Smart Bias-T

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP20, IP67, IP68

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax