Specialty Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Six/Three-Beam Special Events Antenna MBA6-11F-CP-H3
                
       
       
         
  MBA6 11F BU H3 front iso perspective 20150514  
  • Three foot (1.0 m), single panel, with three beams covering 817-869 MHz and six beams covering 1850-1995 MHz
  • Three low band beams optimized for maximum throughput over frequency bands (817-869 MHz); Six high band beams optimized for maximum throughput over frequency bands (1850-1995 MHz)
  • Dual +/- 45° cross-polarization for each beam pair
  • Separate beams support 3 low band and 6 high-band sub-sectors
  • Simultaneous High Band PCS 1900 MHz, SMR 850 MHz and Cellular 850 Coverage. 
  • Enables efficient evolution of wireless networks. 
  • Increases site capacity through high order sectorization.
  • Avoid carrier-adds and building of new capacity sites.
  • Boosts data throughput by lowering interference.
  • Patented beam shaping technology maximizes coverage
  • Optimized beam crossover and spacing for maximum throughput

Overview

 

The CCI Six/Three-Beam Special Events Antenna is an LTE ready multi-beam, multi-band  antenna that simultaneously supports (6) high band and (3) low band sectors from a single antenna.  This Six/Three-Beam Antenna is intended for use at sporting and entertainment venues where social media and the ability to share photos and videos demand high capacity and high data rates.  The high band ports provide coverage for PCS 1900 MHz band while the low band ports provide SMR 800 and Cellular 850 MHz capability in a  compact, three foot (1.0 m) high single enclosure.  Each beam is fed by a pair of +45° and -45° cross-polarized ports. The high band beams are each roughly 15 degrees apart and each pair are evenly juxtaposed  on the three low band beams.  This antenna segments large audiences into multiple sectors thus enabling maximum spectrum re-use by sectorization, providing as much as nine times increase in network capacity.  Our unique beam shaping technology provides fast roll off between beams, minimizing  interference between sectors thus increasing the carrier to interference plus noise (CINR) ratio and lowering soft handover losses in LTE, UMTS/HSPA+ and CDMA/EVDO networks. Such an approach enhances data transfer rates within LTE, UMTS and EVDO network sectors and addresses “hotspots” in mobile wireless operator networks.

The single panel design of the CCI Six/Three-Beam Special Event Antenna offers the opportunity to reduce antenna count and directly replaces multiple narrow beam antennas. The antenna minimizes the need for optimization as each beam is spaced optimally for maximum throughput thus providing significant CAPEX and OPEX cost savings.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • Upgrade of data-throughput or capacity constrained sites
  • Spectrum limited markets
  • Deferral of CDMA/EVDO or UTMS/HSPA+ carrier adds
  • Spectrum clearing and refarming

Electrical

Ports 6 × Low Band Ports for 817-869 MHz 12 × High Band Ports for 1850-1995 MHz
Frequency Range 817-869 MHz 1850-1995 MHz
Gain 18.3 dBi 22.4 dBi
Azimuth Beamwidth (-3dB) 3 x 15.4° 6 x 8.3°
Azimuth Beam Crossover (Typ.) -10 dB -10.5 dB
Elevation Beamwidth (-3dB) 20.1° 11.4°
Electrical Downtilt
Elevation Sidelobes (1st Upper) < -22 dB < -20 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 30 dB
Interbeam Isolation > 15 dB > 15 dB
Interbeam Isolation (Non-Adjacent Beams) >13 dB >13 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -153 dBc ≤ -153 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts
Polarization Dual Linear 45° Dual Linear 45°
Input Impedance 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground

Mechanical

Dimensions (L×W×D) 40.8×55.0×9.9 in (1036×1398×251 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 479 lbs (2130 N) @ 100 mph (161 kph)
Side Wind Load 91 lbs (406 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 18.7 ft2 (1.7 m2)
Weight * 115 lbs (52.0 kg)
Connector 18 × 7-16 DIN female long neck
Mounting Pole 2x 2 to 5 in (5 to 12 cm)
* Weight excludes mounting
Bottom View  
   PI MBA611FCPH3 Bottom
Connector Spacing  
   DD MBA611FBUCPH3 CONNECTORDIAGRAM

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
  AP MBA611FBUH3 796 AZEL6 AP MBA611FBUH3 1940 AZEL6
  796 MHz Azimuth / Elevation 6° 1940 MHz Azimuth / Elevation 4°
 

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

MBA6-11F-CP-H3 Three foot (1.0 m) Six-Three Beam Special Events Antenna with fixed electrical tilt
MBA6-11F-CP-H3-K Three fooot (1.0 m) Antenna and two MBK-03 Mounting Brackets
MBK-03 x 2 Mounting bracket kit (top and bottom) with 0° to 12° mechanical tilt adjustment


Standards & Compliance

Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Federal Communication Commission (FCC) Part 15 Class B, ISO 9001:2008
 
ISO9001Logo RoHS logo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax