Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      OctoPort Multi-Band Antenna OPA65R-W4B
                
       
       
         
 
  PI OPA65RW4B front isometric PI OPA65RW4B back isometric  
  • Four foot (1.3 m), eight port antenna with a 65° azimuth beamwidth covering 1710-2180 MHz
  • Eight high band ports in a single antenna
  • Sharp elevation beamwidth aids in network planning
  • Optimal elevation sidelobe performance
  • Enhanced array spacing ensures optimal MIMO performance
  • Exceeds minimum PIM performance requirements
  • Multi-network solution in one radome with eight ports
  • Reduces tower load and increases space for tower mounted remote radio heads
  • Multi-band design improves site radio resource management
  • Field replaceable, integrated AISG 2.0 compliant Remote Electrictal Tilt (RET) system with independent tilt control for each paired port
 

Overview

 

The CCI OctoPort multi-band array is an eight port antenna with full Advanced Wireless Service band coverage. With eight high band ports covering 1710-2180 MHz, this four foot (1.3 m) CCI OctoPort provides the capability to deploy 4×4 Multiple-input Multiple-output (MIMO) in the high band. The OctoPort allows separate tilt control for each pair of ports enabling maximum flexibility in network deployment.

CCI has engineered its antennas using new and innovative design techniques to provide optimal sidelobe performance, sharp elevation beams, and high front to back ratio.

Multiple technologies can now be connected to a single antenna, reducing tower load, lease expense, deployment time and installation cost.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • 4×4 MIMO for the high band
  • Increase capacity without adding antennas
  • Cosite current, and next-generation basestation technologies on the same antenna

Electrical

Ports 8 × High Band Ports for 1710-2180 MHz
Frequency Range 1710-1880 MHz 1850-1990 MHz 1920-2180 MHz
Gain Peak1 17.8 dBi 17.9 dBi 18.0 dBi
Gain Average2 17.1 dBi 17.4 dBi 17.4 dBi
Azimuth Beamwidth (-3dB) 65° 65° 66°
Elevation Beamwidth (-3dB) 7.1° 6.5° 6.2°
Electrical Downtilt 0° to 10° 0° to 10° 0° to 10°
Elevation Sidelobes (1st Upper) < -18 dB < -18 dB < -18 dB
Front-to-Back Ratio @180° > 30 dB > 30 dB > 30 dB
Cross-Polar Discrimination (at Peak) > 21 dB > 21 dB > 21 dB
Cross-Polar Discrimination (at Sector)2 14 dB 10 dB 8.5 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio (VSWR) < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

 

Mechanical

Dimensions (L×W×D) 51.4×23.1×6.3 in (1307×587×161 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 254 lbs (1128 N) @ 100 mph (161 kph)
Side Wind Load 83 lbs (370 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 9.9 ft2 (0.9 m2)
Weight* 50.7 lbs (23.0 kg)
RET System Weight 3.3 lbs (1.5 kg)
Connector 8 × 4.3-10  female 
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting and RET
Bottom View    RET Connection Diagram
   PI OPA65RW4B bottom  PI OPA65RW4B RET
Connector Spacing  
   PI OPA65RW4B Connectorspacing

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
APLegend Low BG OPA65RW4B AP 1710 AZ OPA65RW4B AP 1710 EL5
  1710 MHz Azimuth 1710 MHz Elevation 5°
APLegend Low BG OPA65RW4B AP 1920 AZ OPA65RW4B AP 1920 EL5
  1920 MHz Azimuth 1920 MHz Elevation 5°
MBK-02   MBK-02 Mounting Kit
BSA-RET200   Remote Electrical Tilt System (RET)
QPA-CBK-AG-RRU   OctoPort antenna with 2 RET to RRU AISG cable kit
CBK-RA-AG-RRU-001   OctoPort antenna with 2 RET to RRU AISG right angle cable kit 
SCU-AISG-P   Portable AISG 2.0 Site Control Unit

Software/Firmware

pdficon large OPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

OPA65R-W4BA-K Four foot (1.3 m) OctoPort Antenna with 65° azimuth beamwidth, 4.3-10 connectors, 2 factory installed BSA-RET200 RET actuators and MBK-02 mounting bracket
MBK-02 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
QPA-CBK-AG-RRU OctoPort antenna with 2 RET's to RRU AISG cable kit
CBK-RA-AG-RRU-001 OctoPort antenna with 2 RET's to RRU AISG right angle cable kit
 
 

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax