Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      OctoPort Multi-Band Antenna OPA-45R-LCWW-H4
                
       
       
         
   PI OPA45RLCWWH4 front iso 20150806 PI OPA45RLCWWH4 rear ISO 20170704  
  • Four foot (1.3 m), eight port antenna with an 45° azimuth beamwidth covering 698-787 MHz, 824-896 MHz and 1695-2180 MHz
  • Four high band and four low band ports in a single antenna
  • Sharp elevation beamwidth aids in network planning
  • Optimal elevation sidelobe performance
  • Enhanced array spacing ensures optimal MIMO performance
  • Exceeds minimum PIM performance requirements
  • Multi-network solution in one radome with eight ports
  • Reduces tower load and increases space for tower mounted remote radio heads
  • Multi-band design improves site radio resource management
  • Field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET) system with independent tilt control for each freq group.
   

Overview

 

The CCI OctoPort multi-band array is an eight port antenna with full Advanced Wireless Service (AWS) band coverage. With four high band ports covering 1695-2180 MHz, two ports covering 698-787 MHz and two ports covering 824-896 MHz, this four foot (1.3 m) CCI OctoPort provides the capability to deploy 4×4 Multiple-input Multiple-output (MIMO) in the high band.

CCI has engineered its antennas using new and innovative design techniques to provide optimal sidelobe performance, sharp elevation beams, and high front to back ratio.

Multiple technologies can now be connected to a single antenna, reducing tower load, lease expense, deployment time and installation cost.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • 4×4 MIMO for the high band and low band
  • Increase capacity without adding antennas
  • High sector count sites
  • Densely populated macro sites
  • Cosite current, and next-generation basestation technologies on the same antenna

Electrical

Ports 2 × Low Band Ports for 698-787 MHz 2 × Low Band Ports for 824-896 MHz 4 × High Band Ports for 1695-2180 MHz
Frequency Range 698-787 MHz 824-896 MHz 1850-1990 MHz 1695-1755/2110-2180 MHz
Gain (dBi) 13.7 13.9 17.0 16.5 17.0
Azimuth Beamwidth (-3dB) (°) 50 44 49 48 47
Elevation Beamwidth (-3dB) (°) 17.7 15.3 9.5 10.5 8.8
Electrical Downtilt (°) 0 to 14 0 to 14 0 to 10 0 to 10 0 to 10
Elevation Sidelobes (1st Upper) (dB) < -18 < -18 < -18 < -18 < -17
Front-to-Back Ratio @180° (dB) > 30 > 30 > 35 > 35 > 35
Cross-Polar Discrimination (at Peak) (dB) > 28 > 25 > 25 > 25 > 25
Cross-Polar Port-to-Port Isolation (dB) > 25 > 25 > 25 > 25 > 25
Voltage Standing Wave Ratio (VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) (dBc) ≤ -153 ≤ -153 ≤ -153 ≤ -153 ≤ -153
Input Power Continuous Wave (CW) 500 watts 500 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground

 

BASTA Electrical Specifications*      
Frequency Range 698-787 MHz 824-896 MHz 1850-1990 MHz 1695-1755/2110-2180 MHz
Gain over all Tilts (dBi) 13.7 13.9 17.0 16.5 17.0
Gain over all Tilts Tolerance (dB) 0.6 0.7 0.3 0.3 0.6
Gain at Low-tilt (dBi) 14.0 14.3 17.0 16.4 17.1
Gain at Mid-tilt (dBi) 13.8 14.0 17.1 16.6 17.3
Gain at High-tilt (dBi) 13.3 13.3 16.8 16.3 16.5
Azimuth Beamwidth Tolerance (°) 1.3 2.6 1.8 3.1 3.5
Elevation Beamwidth Tolerance (°) 1.7 1.0 0.4 0.4 0.5
Electrical Downtilt Deviation (°) 1.7 1.3 0.7 0.7 0.8
Front-to-Back Ratio over ± 20° (dB) 26.2 25.4 28.2 24.7 25.0
First Upper Sidelobe Suppression (dB) 15.2 16.2 14.6 16.7 13.8
Upper Sidelobe Suppression peak to 20°(dB) 18.7 17.5 15.8 18.2 14.5
* Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.
All specifications are subject to change without notice.

Mechanical

Dimensions (L×W×D) 50.2×18.6×8.2 in (1275×472×210 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 200 lbs (891 N) @ 100 mph (161 kph)
Side Wind Load 100 lbs (445 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 7.8 ft2 (0.7 m2)
Weight * 56.9 lbs (25.8 kg)
Connector 8× 4.3-10 female
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting
Bottom View   RET Position
   PI OPA45RLCWWH4 Bottomlabel 20170704 PI OPA45RLCWWH4 RET 20170704
Connector Spacing  
   PI OPA45RLCWWH4 CONNECTOR SPACING 20170704

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
APLegend-Low-BG AP OPA45RLCWWH4 782 AZ 20150904 AP OPA45RLCWWH4 782 EL7 20150904
  782 MHz Azimuth 782 MHz Elevation 7°
APLegend-Low-BG AP OPA45RLCWWH4 842 AZ 20150904 AP OPA45RLCWWH4 842 EL7 20150904
  842 MHz Azimuth  842 MHz Elevation 7° 
APLegend-High AP OPA45RLCWWH 1930 AZ AP OPA45RLCWWH4 1930 EL5
  1930 MHz Azimuth 1930 MHz Elevation 5°
MBK-02 MBK-02 Mounting Kit
BSA-RET200 Type 1 External Remote Electrical Tilt System (RET)
HPA-CBK-AG-RRU OPA antenna with 3 RET to RRU AISG cable kit
HPA-CBK-RA-AG-RRU OPA antenna with 3 RET to RRU AISG right angle cable kit 
SCU-AISG-P Portable AISG 2.0 Site Control Unit

Software/Firmware

pdficon large OPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

OPA-45R-LCWW-H4-K Four foot (1.3 m) OctoPort antenna with 45° azimuth beamwidth, 4.3-10 connectors, 3 factory installed BSA-RET200 RET actuators and MBK-02 mounting bracket
MBK-02 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
HPA-CBK-AG-RRU OPA antenna with 3 RET to RRU AISG cable kit
HPA-CBK-RA-AG-RRU OPA antenna with 3 RET to RRU AISG right angle cable kit 

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax