Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      TriBand Twelve Port Antenna TPA65R-KE8B
                
       
       
         
   PI TPA65RKE8BA front iso 20170718 PI TPA65RKE8BA rear iso 20170718  
  • Eight foot (2.4 m) TriBand, twelve port antenna with a 65° azimuth beamwidth covering 694-960 MHz and 1695-2690 MHz frequencies
  • Eight wide high band ports covering 1695-2690 MHz and four wide low band ports covering 694-960 MHz in a single antenna enclosure
  • Full Spectrum Compliance 694-960 MHz / 1695-2690 MHz
  • Array configuration allows for 4T4R (4X4 MIMO) on Low Band
  • LTE Optimized FBR and SPR performance, providing for an efficient use of valuable radio capacity
  • LTE Optimized Boresight and Sector XPD and USL performance, essential for LTE Performance
  • Exceeds minimum PIM performance requirements
  • Equipped with new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
  • Equipped with 4 field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET) Controllers (Type 1 External)
   

Overview

 

The CCI 12-Port TriBand array is a twelve port antenna, with eight wide high band ports covering 1695-2690 MHz and four wide low band ports covering 694-960 MHz. The antenna provides the capability to deploy Dual 4×4 Multiple-input Multiple-output (MIMO) in the high band and 4X4 MIMO across low band ports. The CCI 12-Port allows independent tilt control between the low band ports and high band ports and independent tilt control between left and right antenna arrays.

In this four RET configuration, the 1st RET is dedicated for the two Left Low Band ports and the 3rd RET is for the two Right Low Band ports. The 2nd RET is dedicated for the four Left High Band ports and the 4th RET is dedicated for the four Right High Band ports. This RET arrangement allows for complete flexibility in coverage control between left and right antenna arrays.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • Dual 4×4 MIMO for the High Band and 4X4 MIMO Low Band ports
  • Ready for Network Standardization on 4.3-10 DIN connectors
  • With CCI’s TriBand antennas, wireless providers can connect multiple platforms to a single antenna, reducing tower load, lease expense, deployment time and installation costs

Electrical

Ports 4 × Low Band Ports for 694-960 MHz
Frequency Range 694-806 MHz 790-862 MHz 824-896 MHz 880-960 MHz
Gain 16.1 dBi 16.3 dBi 16.6 dBi 16.6 dBi
Azimuth Beamwidth (-3dB) 63°  57° 57° 55° 
Elevation Beamwidth (-3dB) 9.4°  8.4° 8.0° 7.4°
Electrical Downtilt 0° to 10° 0° to 10° 0° to 10° 0° to 10°
Elevation Sidelobes (1st Upper) <-20 dB <-20 dB <-20 dB <-20 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB > 35 dB
Cross-Polar Discrimination at Peak > 25 dB > 28 dB > 25 dB > 23 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio (VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -153 dBc ≤ -153 dBc ≤ -153 dBc ≤ -153 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts 500 watts 500 watts
Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground

 

BASTA Electrical Specifications  
Frequency Range 694-806 MHz 790-862 MHz 824-896 MHz 880-960 MHz
Gain over all Tilts (dBi) 15.3 15.9 16.0 16.0
Gain over all Tilts Tolerance (dB) 0.6 0.3 0.3 0.5
Gain at Low-Tilt (dBi) 15.2 15.8 15.9 15.8
Gain at Mid-Tilt (dBi) 15.4 16.0 16.2 16.2
Gain at High-Tilt (dBi) 15.2 15.8 15.9 16.1
Azimuth Beamwidth Tolerance (°) 8.3 4.1 5.0 5.3
Elevation Beamwidth Tolerance (°) 0.8 0.5 0.5 0.5
Electrical Downtilt Deviation (°) 1.2 1.2 1.2 1.1
First Upper Sidelobe Suppression (dB) 17.3 17.9 18.6 17.9
Upper Sidelobe Suppression Peak to 20°(dB) 17.2 16.0 16.2 16.1
Front-to-Back Ratio over ±20° (dB) 25.1 28.8 29.1 29.6
Cross-polar Discrimination at ±60° (dB) 9.7 8.7 8.9 9.6
* Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.
All specifications are subject to change without notice.

 

Ports 8 × High Band Ports for 1695-2690 MHz
Frequency Range 1695-1880 MHz 1850-1990 MHz 1920-2180 MHz 2300-2400 MHz 2496-2690 MHz
Gain 18.1 dBi 18.2 dBi 18.2 dBi 17.9 dBi 18.2 dBi
Azimuth Beamwidth (-3dB) 62° 62° 63° 62° 61°
Elevation Beamwidth (-3dB) 5.7° 5.1° 4.8° 4.1° 3.8°
Electrical Downtilt 0° to 8° 0° to 8° 0° to 8° 0° to 8° 0° to 8°
Elevation Sidelobes (1st Upper) <-17 dB <-17 dB <-17 dB <-17 dB <-17 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB > 35 dB > 35 dB
Cross-Polar Discrimination at Peak > 19 dB > 18 dB > 19 dB > 18 dB > 17 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio (VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -153 dBc ≤ -153 dBc ≤ -153 dBc ≤ -153 dBc ≤ -153 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts 300 watts 300 watts
Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground

 

BASTA Electrical Specifications  
Frequency Range 1695-1880 MHz 1850-1990 MHz 1920-2180 MHz 2300-2400 MHz 2496-2690 MHz
Gain over all Tilts (dBi) 17.1 17.3 17.5 17.1 17.1
Gain over all Tilts Tolerance (dB) 0.6 0.8 0.6 0.8 0.8
Gain at Low-Tilt (dBi) 16.9 16.9 17.2 16.6 16.8
Gain at Mid-Tilt (dBi) 17.1 17.4 17.7 17.3 17.4
Gain at High-Tilt (dBi) 17.2 17.6 17.7 17.3 17.3
Azimuth Beamwidth Tolerance (°) 4.2 3.9 3.9 6.5 5.3
Elevation Beamwidth Tolerance (°) 0.5 0.3 0.5 0.2 0.2
Electrical Downtilt Deviation (°) 0.5 0.3 0.3 0.5 0.5
First Upper Sidelobes Suppression (dB) 14.8 15.1 15.3 14.1 15.1
Upper Sidelobe Suppression Peak to 20°(dB) 13.8 14.2 13.4 11.9 12.4
Front-to-Back Ratio over ±20° (dB) 27.7 28.3 27.9 27.9 27.4
Cross-polar Discrimination at ±60° (dB) 8.7 6.7 6.9 7.6 7.0
* Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.
All specifications are subject to change without notice.

 

Mechanical

Dimensions (L×W×D) 96.0×25.5×7.6 in (2438×648×194 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 547 lbs (2432 N) @ 100 mph (161 kph)
Side Wind Load 207 lbs (920 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 21.4 ft2 (2.0 m2)
Weight * 108.0 lbs (49.0 kg)
RET Weight 6.6 lbs (3.0 kg)
Connector 12 × 4.3-10 female
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting and RET
Bottom View  
   PI TPA65RKE8BA btm w label
Connector Spacing  
  PI TPA65RKE8BA Connector Spacing

 

RET to Element Configuration  TPA65R-KE8BA Element and RET configuration (Type 1 External RET)
   PI TPA65RKE8BA RET Element Config

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
  TPA65RKE8B AP 776 AZEL5 TPA65RKE8B AP 880 AZEL5
  776 MHz Azimuth with Elevation 5° 880 MHz Azimuth with Elevation 5°
  TPA65RKE8B AP 945 AZEL5  
  945 MHz Azimuth with Elevation 5°  
  TPA65RKE8B AP 1740 AZEL4 TPA65RKE8B AP 1970 AZEL4
  1740 MHz Azimuth with Elevation 4° 1970 MHz Azimuth with Elevation 4°
  TPA65RKE8B AP 2155 AZEL4 TPA65RKE8B AP 2610 AZEL4
  2155 MHz Azimuth with Elevation 4°  2610 MHz Azimuth with Elevation 4°
MBK-01   MBK-01 Mounting Kit
BSA-RET200   Remote Electrical Tilt System (RET)
OPA-CBK-AG-RRU   AISG Cable set for four RET antenna
KUE-CBK-RA-AG-RRU   AISG Right Angle Cable set for four RET Antenna
SCU-AISG2-P   Portable AISG 2.0 Site Control Unit

Software/Firmware

pdficon large Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

TPA65R-KE8BA-K Eight foot (2.4 m) TriBand antenna with 65° azimuth beamwidth, 4.3-10 female connectors, 4 factory installed BSA-RET200 RET actuators and MBK-01 mounting bracket
MBK-01 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
OPA-CBK-AG-RRU RRU AISG cable kit for four RET antenna
KUE-CBK-RA-AG-RRU RRU AISG right angle cable kit for four RET antenna

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax