Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      HexPort Multi-Band Antenna HPA65R-BU8A
                
       
       
         
  PI HPA65RBU8A front isometric PI HPA65RBU8A back isometric   
  • Eight foot (2.4 m) multiband, six port antenna with a 65° azimuth beamwidth covering 698-896 MHz and 1695-2400 MHz frequencies
  • Four wide high band ports covering 1695-2400 MHz and two wide low band ports covering 698-896 MHz in a single antenna
  • New enclosure with <12” (305 mm) width, narrowest enclosure in the industry
  • Full Spectrum Compliance for WCS and AWS-3 frequencies and upcoming Band 14 Operations
  • LTE Optimized FBR and SPR performance, providing for an efficient use of valuable radio capacity
  • LTE Optimized Boresight and Sector XPD and USL performance, essential for LTE Performance
  • Exceeds minimum PIM performance requirements
  • Equipped with new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
  • Ordering options for 2 or 3 field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET) Controllers (Type 1 External)
   

Overview

 

The CCI HexPort multiband array is a six port antenna, with four wide high band ports covering 1695-2400 MHz and two wide low band ports covering 698-896 MHz. The CCI HexPort provides the capability to deploy 4×4 Multiple-input Multiple-output (MIMO) in the high band and 2x2 Multiple-input Multiple-output in the low band. The CCI HexPort allows separate tilt control between the low band ports and high band ports. With the use of three RET controllers, the paired high band ports can be tilted independently, enabling maximum flexibility in network deployment.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • 4×4 MIMO for the high band and 2×2 MIMO for the low band
  • Ready for Network Standardization on 4.3-10 DIN connectors
  • With CCI’s multiband antennas, wireless providers can connect multiple platforms to a single antenna, reducing tower load, lease expense, deployment time and installation costs

Electrical

Ports 2 × Low Band Ports for 698-896 MHz
Frequency Range 698-806 MHz 824-896 MHz
Gain1 15.5 dBi 15.9 dBi
Gain (Average)2 15.0 dBi 15.4 dBi
Azimuth Beamwidth (-3dB) 67°  67°
Elevation Beamwidth (-3dB) 9.7°  8.1°
Electrical Downtilt 0° to 10° 0° to 10°
Elevation Sidelobes (1st Upper) <-17 dB <-21 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB
Cross-Polar Discrimination at Peak > 25 dB > 25 dB
Cross-Polar Discrimination at Sector2 > 12 dB > 14 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB
Voltage Standing Wave Ratio (VSWR) < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts
Polarization Dual Linear 45° Dual Linear 45°
Input Impedance 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

 

Ports 4 × High Band Ports for 1695-2400 MHz
Frequency Range 1695-1880 MHz 1850-1990 MHz 1920-2180 MHz 2300-2400 MHz
Gain1 18.0 dBi 18.1 dBi 18.3 dBi 18.0 dBi
Gain (Average)2 17.1 dBi 17.5 dBi 17.7 dBi 17.2 dBi
Azimuth Beamwidth (-3dB) 63° 62° 62° 60°
Elevation Beamwidth (-3dB) 5.6° 5.1° 4.7° 4.0°
Electrical Downtilt 0° to 8° 0° to 8° 0° to 8° 0° to 8°
Elevation Sidelobes (1st Upper) <-18 dB <-18 dB <-18 dB <-16 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB > 35 dB
Cross-Polar Discrimination at Peak > 18 dB > 17 dB > 18 dB > 17 dB
Cross-Polar Discrimination at Sector2 > 11 dB > 9 dB > 9 dB > 7 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio (VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts 300 watts
Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

Mechanical

Dimensions (L×W×D) 96.0×11.7×7.6 in (2437×297×193 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 287 lbs (1278 N) @ 100 mph (161 kph)
Side Wind Load 206 lbs (916 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 11.2 ft2 (1.0 m2)
Weight * 54.0 lbs (24.5 kg)
RET Weight 3.3 lbs (1.5 kg) for two RET's
  5.0 lbs (2.3 kg) for three RET's
Connector 6 × 4.3-10 female
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting and RET
Bottom View HPA65R-BU8A model
  PI HPA65RBU8AA bottom
 
Connection Spacing Diagram HPA65R-BU8A
  PI HPA65RBU8AA connector spacing

 

RET to Element Configuration  HPA65R-BU8AA Element and RET configuation
   PI HPA65RBU8AA RET Element Config

 

RET to Element Configuration  HPA65R-BU8AB Element and RET configuration
   PI HPA65RBU8AB RET Element Config

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
Azumuth elevation HPA65RBU8A AP 704 AZEL5 HPA65RBU8A AP 840 AZEL5
  704 MHz Azimuth with Elevation 5° 840 MHz Azimuth with Elevation 5°
 Pos Neg Pos Neg Red Elevation HPA65RBU8A AP 1740 AZEL4 HPA65RBU8A AP 1970 AZEL4
  1740 MHz Azimuth with Elevation 4° 1970 MHz Azimuth with Elevation 4°
Pos Neg Pos Neg Red Elevation HPA65RBU8A AP 2155 AZEL4  
  2155 MHz Azimuth with Elevation 4°  
MBK-01   MBK-01 Mounting Kit
BSA-RET200   Remote Electrical Tilt System (RET)
HPA-CBK-AG-RRU   HexPort antenna with 3 RET to RRU AISG cable kit
HPA-CBK-RA-AG-RRU   HexPort antenna with 3 RET to RRU AISG right angle cable kit 
QPA-CBK-AG-RRU   HexPort antenna with 2 RET to RRU AISG cable kit
QPA-CBK-RA-AG-RRU   HexPort antenna with 2 RET to RRU AISG right angle cable kit 
SCU-AISG-P   Portable AISG 2.0 Site Control Unit

Software/Firmware

pdficon large Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

HPA65R-BU8AA-K Eight foot (2.4 m) HexPort antenna with 65° azimuth beamwidth, 4.3-10 female connectors, three factory installed BSA-RET200 RET actuators (Type 1 external) and MBK-01 mounting bracket
HPA65R-BU8AB-K Eight foot (2.4 m) HexPort antenna with 65° azimuth beamwidth, 4.3-10 female connectors, two factory installed BSA-RET200 RET actuators (Type 1 external) and MBK-01 mounting bracket
HPA65R-BU8AC-K Eight foot (2.4 m) HexPort antenna with 65° azimuth beamwidth, 4.3-10 female connectors, 3 factory installed BSA-RET400 RET actuators (Type 17 internal) and MBK-02 mounting bracket
MBK-01 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
HPA-CBK-AG-RRU HexPort antenna with 3 RET to RRU AISG cable kit
HPA-CBK-RA-AG-RRU HexPort antenna with 3 RET to RRU AISG right angle cable kit 
QPA-CBK-AG-RRU HexPort antenna with 2 RET to RRU AISG cable kit
QPA-CBK-RA-AG-RRU HexPort antenna with 2 RET to RRU AISG right angle cable kit 

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax