Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Twelve Port Multi-Band Antenna TPA-65R-LCUUUU-H6
                
       
       
         
  PI TPA65RLCUUUUH6 external front iso PI TPA65RLCUUUUH6 external rear iso  
  • Eight High Broadband ports covering PCS, AWS / AWS-3 and WCS bands (698-798 MHz, 824-896 MHz. & 1695-2360 MHz.)
  • Four Low Band ports covering 700 MHz and 850 MHz bands
  • Supports 8x8 MIMO in high band
  • Excellent PIM Performance
  • A multi-network solution in one radome
  • Field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET) system with independent tilt control of each freq band set
  • Reduces tower loading
  • Frees up space for tower mounted Remote Radio Heads
  • All Band design simplifies radio assignments
  • Single radome with twelve ports
  • Sharp elevation beam eases network planning

Overview

 

The CCI 12-port Multi-Band Antenna Array is a 12-port antenna with eight high band ports that cover the full PCS, AWS / AWS-3 and WCS bands. In addition to the eight high band ports, the antenna includes two 700 MHz ports and two 850 MHz ports. The 12-port antenna is ready for 8x8 MIMO or dual 4x4 MIMO in high bands.
Modern networks demand high performance, consequently CCI has incorporated several new and innovative design techniques to provide an antenna with excellent side-lobe performance, sharp elevation beams, and high front to back ratio.
Multiple networks can now be connected to a single antenna, reducing tower loading and leasing expense, while decreasing deployment time and installation cost.
Full band capability for 700 MHz , Cellular 850 MHz, PCS 1900 MHz, AWS 1695/2180 MHz and WCS 2300 MHz coverage in a single enclosure.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • 8x8 MIMO and 4x4 MIMO on High bands
  • 2x2 MIMO on 700 & 850 bands
  • Adding additional capacity without adding additional antennas

Electrical

Ports 2 Low Band Ports for 698-798 MHz 2 Low Band Ports for 824-896 MHz
Frequency Range 698-787 MHz 787-798 MHz 824-896 MHz
Gain Peak 14.3 dBi 13.9 dBi 14.6 dBi
Gain Average* 13.9 dBi 13.6 dBi 14.3 dBi
Azimuth Beamwidth (-3dB) 63° 67° 64°
Elevation Beamwidth (-3dB) 13.0° 12.1° 11.0°
Electrical Downtilt 0° to 10° 0° to 10° 0° to 10°
Elevation Sidelobes (1st Upper) < -18 dB < -19 dB < -19 dB
Front-to-Back Ratio @180° > 30 dB > 32 dB > 35 dB
Front-to-Back Ratio over ± 20° > 30 dB > 32 dB > 33 dB
Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB > 25 dB
Cross-Polar Discrimination (at ± 60°) > 20 dB > 20 dB > 20 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts 500 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground
*Per BASTA specification of Gain over all Tilts
All specifications are subject to change without notice.

 

Ports 8 High Band Ports for 1695-2360 MHz
Frequency Range 1850-1990 MHz 1695-1780/2110-2180 MHz 2305-2360 MHz
Gain Peak 15.9 dBi 15.2 dBi 16.4dBi 16.2 dBi
Gain Average* 15.3 dBi 14.5 dBi 15.8 dBi 15.5 dBi
Azimuth Beamwidth (-3dB) 61° 62° 61° 63°
Elevation Beamwidth (-3dB) 10.5° 11.8° 9.1° 8.3°
Electrical Downtilt 2° to 12° 2° to 12° 2° to 12° 2° to 12°
Elevation Sidelobes (1st Upper) < -17 dB < -15 dB < -17 dB < -15 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 32 dB > 33 dB > 34 dB > 33 dB
Cross-Polar Discrimination (at Peak) > 17 dB > 20 dB > 20 dB > 25 dB
Cross-Polar Discrimination (at ± 60°) > 17 dB > 16 dB > 17 dB > 17 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground
*Per BASTA specification of Gain over all Tilts
All specifications are subject to change without notice.

Mechanical

Dimensions (L×W×D) 71.2×11.8×11.6 in (1808×300×294 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 203 lbs (901 N) @ 100 mph (161 kph)
Side Wind Load 199 lbs (887 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 7.9 ft2 (0.7 m2)
Weight 64.6 lbs (29.3 kg)
Connector 12 × 4.3-10 Female
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting and RET
Bottom View   RET Connection Diagram
  PI TPA65RLCUUUUH6 external bot Label PI TPA65RLCUUUUH6 RET
Connector Spacing  
  PI TPA65RLCUUUUH6 connecetor spacing 042516
Element and RET configuration  
  PI TPA65RLCUUUUH6 RET Config 042116

Typical Antenna Patterns

PI TPA65RLCPPUUH6 lowband legend 20150817 TPA65RLCUUUUH6 AP 713 AZEL5 TPA65RLCUUUUH6 AP 862 AZEL5
  713 MHz Azimuth with Elevation 5° 862 MHz Azimuth with Elevation 5°
PI TPA65RLCPPUUH6 highband legend 20150817 TPA65RLCUUUUH6 AP 1920 AZ TPA65RLCUUUUH6 AP 1920 EL6
  1920 MHz Azimuth 1920 MHz Elevation 6°
TPA65RLCUUUUH8 1920 LEGEND TPA65RLCUUUUH6 AP 2133 AZ TPA65RLCUUUUH6 AP 2133 EL6
  2133 MHz Azimuth 2133 MHz Elevation 6°
Model BSA-RET200   Remote Electrical Tilt System (RET)
OPA-CBK-AG-RRU OctoPort antenna to RRU AISG cable kit
OPA-CBK-RA-AG-RRU OctoPort antenna to RRU AISG right angle cable kit

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

TPA-65R-LCUUUU-H6 6 foot (1.8 m) Twelve Port antenna with 65° azimuth beamwidth and 4 factory installed BSA-RET200 RET actuators
TPA-65R-LCUUUU-H6-K Antenna kit with 4 factory installed RET actuators and MBK-01 mounting bracket
MBK-01 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
OPA-CBK-AG-RRU OctoPort antenna to RRU AISG cable kit
OPA-CBK-RA-AG-RRU OctoPort antenna to RRU AISG right angle cable kit

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax