Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Quad Port Low-Band Array QPA65R-K8A
                
       
       
         
  PI QPA65RK8A front isometric 20150723 PI QPA65RK8A rear isometric 20150723   
  • Wideband performance, covering 700 MHz, 800 MHz and 900 MHz bands
  • Four Low Band ports in one antenna
  • Sharp azimuth roll-off reduces Sector Power Ratio, minimizing adjacent sector interference
  • Excellent Cross-Pol Discrimination and Horizontal Pattern Tracking maximizes 2x2 and 4x4 MIMO performance
  • Excellent elevation side-lobe performance
  • Excellent MIMO performance due to array spacing
  • Excellent PIM Performance
  • A multi-network solution in one radome
  • 3GPP/AISG 2.0 compliant RET system with daisy chaining capability available
  • Reduces tower loading
  • Frees up space for tower mounted E-nodes
  • Provides remote control of electrical Downtilt of antenna for easier optimization
  • 7-16 DIN female or 4.3-10 female connector options
   

Overview

 

The CCI 65° QuadPort Low Band Antenna Array is a 4-port antenna with Low band (698-960 MHz) coverage. With four low band ports, our QuadPort antenna is ready for 4X4 high band MIMO.
Modern networks demand high performance, consequently CCI has incorporated several new and innovative design techniques to provide an antenna with excellent side-lobe performance, sharp elevation beams, and high front to back ratio.
Multiple networks can now be connected to a single antenna, reducing tower loading and leasing expense, while decreasing deployment time and installation cost.
Full band capability for 700 MHz, 800 MHz and 900 MHz in a single enclosure.
CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • 4x4 MIMO
  • Adding additional capacity without adding additional antennas

Electrical

Ports 4 × Low Band Ports for 698-960 MHz
Frequency Range 698-806 MHz 824-896 MHz 880-960 MHz
Gain 15.7 dBi 16.4 dBi 16.1 dBi
Azimuth Beamwidth (-3dB) 65° 62° 64°
Elevation Beamwidth (-3dB) 8.7° 7.4° 7.0°
Electrical Downtilt 2° to 10° 2° to 10° 2° to 10°
Elevation Sidelobes (1st Upper) < -19 dB < -19 dB < -18 dB
Elevation Sidelobes (Peak to 20º) < -18 dB < -18 dB < -17 dB
Front-to-Back Ratio @180° > 35 dB > 30 dB > 30 dB
Cross-Polar Discrimination (at Peak) > 21 dB > 22 dB > 22 dB
Cross-Polar Discrimination (+/-60º) > 11 dB > 10 dB > 10 dB
Cross-Polar Port-to-Port Isolation > 30 dB > 30 dB > 27 dB
Voltage Standing Wave Ratio (VSWR) < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -153 dBc ≤ -153 dBc ≤ -153 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts 500 watts
Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45°
Input Impedance 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground

Mechanical

Dimensions (L×W×D) 98.0×24.3×7.9 in (2489×618×200 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 537 lbs (2390 N) @ 100 mph (161 kph)
Side Wind Load 216 lbs (963 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 21.0 ft2 (1.9 m2)
Weight * 99 lbs (45 kg)
RET System Weight 3.0 lbs (1.5 kg)
Connector 4 × 7-16 DIN female long neck or 4.3-10 female
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting and RET
Bottom View   RET Connection Diagram
  PI QPA65RK8A bottom 20160502 PI QPA65RKKH8 ret
Connector Spacing  
   PI QPA65RK8A connectorspacing 20150723

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
APLegend High QPA65RK8A AP 743 AZ 20150724 QPA65RK8A AP 743 EL6 20150724
  743 MHz Azimuth  743 MHz Elevation 6°
 APLegend-High QPA65RK8A AP 830 AZ 20150724 QPA65RK8A AP 830 EL6 20150724
  830 MHz Azimuth  830 MHz Elevation 6°
Model BSA-RET200   Remote Electrical Tilt System (RET)

Software/Firmware

pdficon large Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

QPA65R-K8AA 8 foot (2.5 m) QuadPort antenna with 65° azimuth beamwidth and 2 factory installed BSA-RET200 actuators and 7-16 DIN female connectors
QPA65R-K8AB  8 foot (2.5 m) QuadPort antenna with 65° azimuth beamwidth and 2 factory installed BSA-RET200 actuators and 4.3-10 female connectors
QPA65R-K8AA-K Antenna kit with 2 factory installed RET actuators, 7-16 DIN female connectors and MBK-01 mounting bracket
QPA65R-K8AB-K Antenna kit with 2 factory installed RET actuators, 4.3-10 female connectors and MBK-01 mounting bracket
MBK-01 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
QPA-CBK-AG-RRU QuadPort antenna to RRU AISG cable kit
QPA-CBK-RA-AG-RRU QuadPort antenna to RRU AISG right angle cable kit

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax