Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      OctoPort Multi-Band Antenna OPA-65R-LCUU-H8
                
       
       
         
  PI OPA65RlCUUH8 front iso 20150723 PI OPA65RlCUUH8 rear iso 20150723  
  • Eight foot (2.4 m), eight port antenna with a 65° azimuth beamwidth covering 698-787 MHz, 824-894 MHz and 1710-2360 MHz
  • Four high band and four low band ports including the WCS band in a single antenna
  • Sharp elevation beamwidth aides in network planning
  • Optimal elevation sidelobe performance
  • Enhanced array spacing ensures optimal MIMO performance
  • Exceeds minimum PIM performance requirements
  • Multi-network solution in one radome with eight ports
  • Reduces tower load and increases space for tower mounted remote radio heads
  • Multi-band design improves site radio resource management
  • Field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET) system with independent tilt control for each paired port

Overview

 

The CCI OctoPort multi-band array is an eight port antenna with full Wireless Communication Service (WCS) band coverage. With four high band ports covering 1710-2360 MHz, two ports covering 698-787 MHz and two ports covering 824-894 MHz, this eight foot (2.4 m) CCI OctoPort provides the capability to deploy 4×4 Multiple-input Multiple-output (MIMO) in the high band. The OctoPort allows separate tilt control for each pair of ports enabling maximum flexibility in network deployment.

CCI has engineered its antennas using new and innovative design techniques to provide optimal sidelobe performance, sharp elevation beams, and high front to back ratio.

Multiple technologies can now be connected to a single antenna, reducing tower load, lease expense, deployment time and installation cost.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • 4×4 MIMO for the high band and 2×2 MIMO for each of the low bands
  • Increase capacity without adding antennas
  • Deploy WCS band without increasing antenna count
  • Cosite current, and next-generation basestation technologies on the same antenna

Electrical

Ports 2 × Low Band Ports for 698-787 MHz 2 × Low Band Ports for 824-894 MHz 4 × High Band Ports for 1710-2360 MHz
Frequency Range 698-787 MHz 824-894 MHz 1850-1990 MHz 1710-1755/2110-2170 MHz 2305-2360 MHz
Gain 14.7 dBi 15.5 dBi 17.0 dBi 16.5 dBi 17.2 dBi 17.1 dBi
Azimuth Beamwidth (-3dB) 65° 61° 62° 67° 64° 61°
Elevation Beamwidth (-3dB) 10.1° 8.5° 5.6° 6.2° 5.0° 4.5°
Electrical Downtilt 2° to 10° 2° to 10° 0° to 8° 0° to 8° 0° to 8° 0° to 8°
Elevation Sidelobes (1st Upper) < -17 dB < -17 dB < -19 dB < -18 dB < -18 dB < -17 dB
Front-to-Back Ratio @180° > 28 dB > 28 dB > 35 dB > 35 dB > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 28 dB > 27 dB > 28 dB > 27 dB > 27 dB > 28 dB
Cross-Polar Discrimination (at Peak) > 24 dB > 20 dB > 25 dB > 25 dB > 25 dB > 25 dB
Cross-Polar Discrimination (at ± 60°) > 16 dB > 14 dB > 18 dB > 18 dB > 18 dB > 18 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts 300 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground DC Ground

Mechanical

Dimensions (L×W×D) 92.8×14.4×7.3 in (2358×366×185 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 327 lbs (1455 N) @ 100 mph (161 kph)
Side Wind Load 191 lbs (849 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 12.8 ft2 (1.2 m2)
Weight * 64.3 lbs (29.2 kg)
RET System Weight 6.6 lbs (3.0 kg)
Connector 8 × 7-16 DIN female long neck
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting and RET
Bottom View   RET Connection Diagram
  DD OPA65RLCUUH8 CONNECTORDIAGRAM RETconnnect8portLabel
Connector Spacing  
  OPA-65R-LCUU-H8BVDim

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
APLegend-Low-BG AP OPA65RLCUUH8 737 AZ AP OPA 65R LCUU H8 737 EL5
  737 MHz Azimuth  737 MHz Elevation 5°

APLegend-Low-BG

 

 

AP OPA65RLCUUH8 887 AZ  AP OPA65RLCUUH8 887 EL5
  887 MHz Azimuth 887 MHz Elevation 5°
APLegend-High AP OPA65RLCUUH8 1920 AZ  AP OPA65RLCUUH8 1920 EL4 
  1920 MHz Azimuth 1920 MHz Elevation 4°
Model BSA-RET200   Remote Electrical Tilt System (RET)

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

OPA-65R-LCUU-H8 Eight foot (2.4 m) OctoPort antenna with 65° azimuth beamwidth and 4 factory installed BSA-RET200 RET actuators
OPA-65R-LCUU-H8-K Antenna kit with 4 factory installed RET actuators and MBK-01 mounting bracket
MBK-01 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
TM-01 Optional triple mount mast bracket for mounting up to three 65° antennas on a pole (or mast). 
BSA-RET200 Remote electrical tilt actuator
OPA-CBK-AG-RRU OctoPort antenna to RRU AISG cable kit
OPA-CBK-RA-AG-RRU OctoPort antenna to RRU AISG right angle cable kit

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax