HexPort Multi-Band Antenna | HPA-85R-BWW-H6 | |||
![]() |
![]() |
|
BSA-RET200 | Remote Electrical Tilt System (RET) |
|
In the Americas | |
Sales | |
+1 (201) 342-3338 phone | |
+1 (201)-342-3339 fax | |
89 Leuning Street | |
South Hackensack, NJ 07606 | |
USA | |
Customer Service | |
+1 (201) 342-3338 phone | |
+1 (201)-342-3339 fax | |
89 Leuning Street | |
South Hackensack, NJ 07606 | |
USA | |
Technical Support | |
+1 (201) 342-3338 phone | |
+1 (201)-342-3339 fax | |
89 Leuning Street | |
South Hackensack, NJ 07606 | |
USA | |
HexPort Multi-Band Antenna | HPA-85R-BWW-H6 | |||
![]() |
![]() |
|
The CCI HexPort multi-band array is a six port antenna with full Advanced Wireless Service (AWS) band coverage. With four high band ports covering 1695-2180 MHz and two low band ports covering 698-896 MHz, this six foot (1.8 m) CCI HexPort provides the capability to deploy 4×4 Multiple-input Multiple-output (MIMO) in the high band. CCI has engineered its antennas using new and innovative design techniques to provide optimal sidelobe performance, sharp elevation beams, and high front to back ratio. Multiple technologies can now be connected to a single antenna, reducing tower load, lease expense, deployment time and installation cost. CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities. |
Ports | 2 × Low Band Ports for 698-896 MHz | 4 × High Band Ports for 1695-2180 MHz | |||
Frequency Range | 698-806 MHz | 824-896 MHz | 1850-1990 MHz | 1695-1755/2110-2180 MHz | |
Gain (dBi) | 13.1 | 13.1 | 15.2 | 14.4 | 15.9 |
Azimuth Beamwidth (-3dB) (°) | 79 | 88 | 92 | 89 | 90 |
Elevation Beamwidth (-3dB) (°) | 12.7 | 10.9 | 5.7 | 6.2 | 5.0 |
Electrical Downtilt (°) | 0 to 10 | 0 to 10 | 0 to 8 | 0 to 8 | 0 to 8 |
Elevation Sidelobes (1st Upper) (dB) | < -16 | < -18 | < -18 | < -18 | < -18 |
Front-to-Back Ratio @180° (dB) | > 30 | > 30 | > 30 | > 30 | > 30 |
Cross-Polar Discrimination (at Peak) (dB) | > 20 | > 18 | > 20 | > 20 | > 20 |
Cross-Polar Port-to-Port Isolation (dB) | > 25 | > 25 | > 25 | > 25 | > 25 |
Voltage Standing Wave Ratio (VSWR) | < 1.5:1 | < 1.5:1 | < 1.5:1 | < 1.5:1 | < 1.5:1 |
Passive Intermodulation (2×20W) (dBc) | ≤ -153 | ≤ -153 | ≤ -153 | ≤ -153 | ≤ -153 |
Input Power Continuous Wave (CW) | 500 watts | 500 watts | 300 watts | 300 watts | 300 watts |
Polarization (Pol) | Dual Pol 45° | Dual Pol 45° | Dual Pol 45° | Dual Pol 45° | Dual Pol 45° |
Input Impedance | 50 ohms | 50 ohms | 50 ohms | 50 ohms | 50 ohms |
Lightning Protection | DC Ground | DC Ground | DC Ground | DC Ground | DC Ground |
z | 1850-1990 MHz | 1695-1755/2110-2180 MHz | |||
Gain over all Tilts (dBi) | 13.1 | 13.1 | 15.2 | 14.4 | 15.9 |
Gain over all Tilts Tolerance (dB) | 0.5 | 0.5 | 0.6 | 0.4 | 0.5 |
Gain at Low-tilt (dBi) | 13.3 | 13.4 | 15.2 | 14.6 | 16.1 |
Gain at Mid-tilt (dBi) | 13.2 | 13.2 | 15.3 | 14.5 | 16.1 |
Gain at High-tilt (dBi) | 12.8 | 12.8 | 15.2 | 14.3 | 15.4 |
Azimuth Beamwidth Tolerance (°) | 4.8 | 8.4 | 7.0 | 6.7 | 2.9 |
Elevation Beamwidth Tolerance (°) | 1.2 | 0.7 | 0.2 | 0.3 | 0.2 |
Electrical Downtilt Deviation (°) | 0.9 | 0.6 | 0.5 | 0.6 | 0.5 |
Front-to-Back Ratio over ± 20° (dB) | 27.2 | 26.3 | 23.2 | 23.6 | 27.2 |
First Upper Sidelobe Suppression (dB) | 13.1 | 15.7 | 18.8 | 16.2 | 18.5 |
Upper Sidelobe Suppression peak to 20°(dB) | 16.0 | 16.9 | 18.2 | 15.3 | 16.3 |
* Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6. All specifications are subject to change without notice. |
Dimensions (L×W×D) | 72.3×14.4×7.3 in (1836×366×185 mm) |
Survival Wind Speed | > 150 mph (> 241 kph) |
Front Wind Load | 243 lbs (1081 N) @ 100 mph (161 kph) |
Side Wind Load | 140 lbs (622 N) @ 100 mph (161 kph) |
Equivalent Flat Plate Area | 9.5 ft2 (0.9 m2) |
Weight * | 46.9 lbs (21.3 kg) |
RET System Weight | 5.0 lbs (2.3 kg) |
Connector | 6 × 7-16 DIN female long neck |
Mounting Pole | 2 to 5 in (5 to 12 cm) |
* Weight excludes mounting and RET |
Bottom View | RET Connection Diagram | |
![]() |
![]() |
Connector Spacing | |
![]() |
BSA-RET200 | Remote Electrical Tilt System (RET) |
HPA-85R-BWW-H6 | Six foot (1.8 m) HexPort antenna with 85° azimuth beamwidth and MBK-01 mounting bracket |
MBK-01 | Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment |
TM-01 | Optional triple mount mast bracket for mounting up to three 85° antennas on a pole (or mast). |
BSA-RET200 | Remote electrical tilt actuator |
HPA-CBK-AG-RRU | HexPort antenna to RRU AISG cable kit |
HPA-CBK-RA-AG-RRU | HexPort antenna to RRU AISG right angle cable kit |
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24 |
FILTER BY SELECTION | ||||||
![]() | PRODUCTS | |
![]() | ANTENNAS | |
![]() | Antenna Accessories |
![]() | Bi-Sector |
![]() | iDAS |
![]() | Multi-Sector/Special Events |
![]() | Single Sector Multiport |
![]() | Small Cell/oDAS |
![]() | Specialty |
![]() | FREQUENCY BAND | |
![]() | 698-798 MHz |
![]() | 698-896 MHz |
![]() | 698-960 MHz |
![]() | 790-960 MHz |
![]() | 824-896 MHz |
![]() | 1710-1880 MHz |
![]() | 1695-2180 MHz |
![]() | 1695-2360 MHz |
![]() | 1695-2690 MHz |
![]() | 1850-1995 MHz |
![]() | 2300-2400 MHz |
![]() | 2300-2690 MHz |
![]() | 2496-2690 MHz |
![]() | HEIGHT | |
![]() | 2 ft. (458 - 761 mm) |
![]() | 4 ft. (1067 - 1371 mm) |
![]() | 5 ft. (1372 - 1676 mm) |
![]() | 6 ft. (1677 - 1981 mm) |
![]() | 7 ft. (1982 - 2286 mm) |
![]() | 8 ft. (2287 - 2590 mm) |
![]() | HORIZONTAL BEAMWIDTH | |
![]() | NUMBER OF PORTS | |