Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      TenPort Multi-Band Antenna DPA-65R-BUUVV-H8
                
       
       
         
  PI DPA65RBUUVVH8 front iso  PI DPA65RBUUVVH8 rear iso  
  • Eight foot (2.4 m), ten port antenna with a 65° azimuth beamwidth covering 698-894 MHz, 1710-2360 MHzand 2300-2690 MHz
  • Eight High Band ports with two Low Band ports in one antenna
  • Sharp elevation beam
  • Excellent elevation side-lobe performance
  • Excellent MIMO performance due to array spacing
  • Excellent PIM Performance
  • A multi-network solution in one radome
  • Reduces tower loading
  • Frees up space for tower mounted Remote Radio Heads
  • Single radome with ten ports
  • All Band design simplifies radio assignments
  • Sharp elevation beam eases network planning



   

Overview

 

The CCI Ten-port 65° Multi-Band Antenna Array is a 10-port antenna with full high band capability. With eight high band ports and two low band ports, our ten-port antenna is ready for 4X4 high band MIMO in PCS / AWS / WCS bands as well as additional 4x4 MIMO in WCS / 2.6 GHz bands.
Modern networks demand high performance, consequently CCI has incorporated several new and innovative design techniques to provide an antenna with excellent side-lobe performance, sharp elevation beams, and high front to back ratio.
Multiple networks can now be connected to a single antenna, reducing tower loading and leasing expense, while decreasing deployment time and installation cost.
Full band capability for 700 MHz , Cellular 850 MHz, PCS 1900 MHz, AWS 1710/2170 MHz and WCS 2300 & 2600 MHz coverage in a single enclosure.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • 4x4 MIMO (x2) on High Band and 2x2 MIMO on Low Band
  • Adding additional capacity without adding additional antennas
  • Adding WCS & 2600 MHz Bands without increasing antenna count

Electrical

Ports 2 × Low Band Ports for 698-894 MHz
Frequency Range 698-806 MHz 824-894 MHz
Gain 15.0 dBi 15.9 dBi
Azimuth Beamwidth (-3dB) 68° 63°
Elevation Beamwidth (-3dB) 10.2° 8.7°
Electrical Downtilt 2° to 10° 2° to 10°
Elevation Sidelobes (1st Upper) < -18 dB < -18 dB
Front-to-Back Ratio @180° > 29 dB > 28 dB
Front-to-Back Ratio over ± 20° > 28 dB > 27 dB
Cross-Polar Discrimination (at Peak) > 24 dB > 22 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts
Polarization Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground

 

Ports 4 × High Band Ports for 1710-2360 MHz 4 × High Band Ports for 2300-2690 MHz
Frequency Range 1850-1990 MHz 1710-1755/2110-2170 MHz 2305-2360 MHz 2305-2360 MHz 2496-2690 MHz
Gain 15.0 dBi 14.3 dBi 15.8 dBi 16.3 dBi 16.4 dBi 16.7 dBi
Azimuth Beamwidth (-3dB) 64° 70° 65° 60° 63° 59°
Elevation Beamwidth (-3dB) 8.9° 9.9° 7.7° 6.8° 6.3° 6.0°
Electrical Downtilt 0° to 8° 0° to 8° 0° to 8° 0° to 8° 0° to 8° 0° to 8°
Elevation Sidelobes (1st Upper) <-20 dB <-20 dB <-20 dB <-20 dB <-15 dB <-16 dB
Front-to-Back Ratio @180° >32 dB >32 dB >32 dB >32 dB >32 dB >32 dB
Front-to-Back Ratio over ± 20° >27 dB >27 dB >27 dB >27 dB > 26 dB > 26 dB
Cross-Polar Discrimination (at Peak) > 27 dB > 27 dB > 27 dB > 27 dB > 25 dB > 25 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio (VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground DC Ground

Mechanical

Dimensions (L×W×D) 92.7×14.4×7.3 in (2355×366×185 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 327 lbs (1453 N) @ 100 mph (161 kph)
Side Wind Load 191 lbs (848 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 12.8 ft2 (1.2 m2)
Weight * 57.0 lbs (25.9 kg)
RET System Weight 5.1 lbs (2.3 kg)
Connector 10 × 7-16 DIN female long neck
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting and RET
Bottom View   RET Connection Diagram
  PI DPA65RBUUVVH6 bottom PI DPA65RBPPUUH8 RET CONFIG
Connector Spacing  
  DPA-65R-BUUUU-H8BVDim

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
APLegend-Low-BG DPA65RBUUVVH6 AP 894 AZ DPA65RBUUVVH6 AP 894 EL5
  894 MHz Azimuth 894 MHz Elevation 5°
APLegend-High DPA65RBUUVVH6 AP 1920 AZ DPA65RBUUVVH6 AP 1920 EL4
  1920 MHz Azimuth 1920 MHz Elevation 4°
APLegend-High DPA65RBUUVVH6 AP 2400 AZ DPA65RBUUVVH6 AP 2400 EL4
  2400 MHz Azimuth 2400 MHz Elevation 4°
APLegend-High DPA65RBUUVVH6 AP 2600 AZ DPA65RBUUVVH6 AP 2600 EL4
  2600 MHz Azimuth 2600 MHz Elevation 4°
Model BSA-RET200   Remote Electrical Tilt System (RET)

Software/Firmware

pdficon large Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

DPA-65R-BUUVV-H8 Eight foot (2.4 m) TenPort antenna with 65° azimuth beamwidth and 3 factory installed BSA-RET200 RET actuators
DPA-65R-BUUVV-H8-K Antenna kit with 3 factory installed RET actuators and MBK-01 mounting bracket
MBK-01 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
TM-01 Optional triple mount mast bracket for mounting up to three 65° antennas on a pole (or mast). 
BSA-RET200 Remote electrical tilt actuator
HPA-CBK-AG-RRU HexPort antenna to RRU AISG cable kit
HPA-CBK-RA-AG-RRU HexPort antenna to RRU AISG right angle cable kit

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax