Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      HexPort Multi-Band Antenna HPA-45I-BWW-H4
                
       
       
         
  PI HPA45IBWWH4 front iso 20150828 PI HPA45IBWWH4 rear iso 20150828  
  • Four foot (1.3 m), six port antenna with a 45° azimuth beamwidth covering 698-896 MHz and 1695-2180 MHz
  • Four high band and two low band ports in a single antenna
  • Sharp elevation beamwidth aids in network planning
  • Optimal elevation sidelobe performance
  • Enhanced array spacing ensures optimal MIMO performance
  • Exceeds minimum PIM performance requirements
  • Multi-network solution in one radome with six ports
  • Reduces tower load and increases space for tower mounted remote radio heads
  • Multi-band design improves site radio resource management
  • Field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET) system with independent tilt control for each paired port
   

Overview

 

The CCI HexPort multi-band array is an industry first six port antenna. With four high band ports covering 1695-2180 MHz and two low band ports covering 698-896 MHz, this four foot (1.3 m) CCI HexPort provides the capability to deploy 4×4 Multiple-input Multiple-output (MIMO) in the high band. The HexPort allows separate tilt control for each pair of ports enabling maximum flexibility in network deployment.

CCI has engineered its antennas using new and innovative design techniques to provide optimal sidelobe performance, sharp elevation beams, and high front to back ratio.

Multiple technologies can now be connected to a single antenna, reducing tower load, lease expense, deployment time and installation cost.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • 4×4 MIMO for the high band and 2×2 MIMO for the low band
  • Increase capacity without adding antennas
  • High sector count sites
  • Densely populated macro sites
  • Cosite current, and next-generation basestation technologies on the same antenna

Electrical

Ports 2 × Low Band Ports for 698-896 MHz 4 × High Band Ports for 1695-2180 MHz
Frequency Range 698-806 MHz 824-896 MHz 1850-1990 MHz 1695-1755/2110-2180 MHz
Gain (dBi) 14.3 14.4 17.0 16.5 17.0
Azimuth Beamwidth (-3dB) (°) 50 44 49 48 47
Elevation Beamwidth (-3dB) (°) 17.7 15.3 9.5 10.5 8.8
Electrical Downtilt (°) 0 to 14 0 to 14 0 to 10 0 to 10 0 to 10
Elevation Sidelobes (1st Upper) (dB) < -18 < -18 < -18 < -18 < -17
Front-to-Back Ratio @180° (dB) > 30 > 30 > 35 > 35 > 35
Cross-Polar Discrimination (at Peak) (dB) > 28 > 25 > 25 > 25 > 25
Cross-Polar Port-to-Port Isolation (dB) > 25 > 25 > 25 > 25 > 25
Voltage Standing Wave Ratio (VSWR)  < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) (dBc) ≤ -153 ≤ -153 ≤ -153 ≤ -153 ≤ -153
Input Power Continuous Wave (CW) 500 watts 500 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground

 

BASTA Electrical Specifications*  
Frequency Range 698-806 MHz 824-896 MHz 1850-1990 MHz 1695-1755/2110-2180 MHz
Gain over all Tilts (dBi) 14.3 14.4 17.0 16.5 17.0
Gain over all Tilts Tolerance (dB) 0.6 0.7 0.3 0.3 0.6
Gain at Low-tilt (dBi) 14.6 14.8 17.0 16.4 17.1
Gain at Mid-tilt (dBi) 14.4 14.5 17.1 16.6 17.3
Gain at High-tilt (dBi) 13.9 13.8 16.8 16.3 16.5
Azimuth Beamwidth Tolerance (°) 1.3 2.6 1.8 3.1 3.5
Elevation Beamwidth Tolerance (°) 1.7 1.0 0.4 0.4 0.5
Electrical Downtilt Deviation (°) 1.7 1.3 0.7 0.7 0.8
Front-to-Back Ratio over ± 20° (dB) 26.2 25.4 28.2 24.7 25.0
First Upper Sidelobe Suppression (dB) 15.2 16.2 14.6 16.7 13.8
Upper Sidelobe Suppression peak to 20°(dB) 18.7 17.5 15.8 18.2 14.5
* Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.
All specifications are subject to change without notice.

Mechanical

Dimensions (L×W×D) 50.2×18.6×8.2 in (1275×472×210 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 200 lbs (891 N) @ 100 mph (161 kph)
Side Wind Load 100 lbs (445 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 7.8 ft2 (0.7 m2)
Weight * 44.1 lbs (20.0 kg)
Connector 6 × 7-16 DIN female long neck
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting
Bottom View  
  PI HPA45IBWWH4H6 bottom with labels 20150824
Connector Spacing  
  DD HPA45ILCWWH4H6 CONNECTORDIAGRAM

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
APLegend-Low-BG HPA-45R-BUU-H4APAZ 719 HPA-45R-BUU-H4APAZ 719 EL 5
  719 MHz Azimuth 719 MHz Elevation 5°
APLegend-High HPA-45R-BUU-H4APAZ 1930 HPA-45R-BUU-H4APAZ 1930 EL 5
  1930 MHz Azimuth 1930 MHz Elevation 5°
Model BSA-RET400   Remote Electrical Tilt System (RET)

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

HPA-45I-BWW-H4 Four foot (1.3 m) HexPort antenna with 45° azimuth beamwidth, 2 factory installed BSA-RET400 RET actuators,  and MBK-02 mounting bracket
MBK-02 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET400 Remote electrical tilt actuator

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax