Indoor DAS Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Small Cell ODA 65°x65° Antenna ODA65F-KE1A

                
       
       
         
  PI ODA65FKE1A front isometric PI ODA65FKE1A REAR  
  • One foot (0.3 m), multiband, four port antenna with a 65° azimuth beamwidth, covering 694-960 MHz and 1695-2690 MHz frequencies
  • Two wide high band ports covering 1695-2960 MHz and two wide low band ports covering 694-960 MHz in an extremely low profile and low weight antenna
  • Full Spectrum Compliance 694-960 MHZ / 1695-2690 MHz, including WCS and AWS-3 Frequencies and upcoming Band 14 Operations
  • The Low weight and Low profile of this panel antenna, makes this an ideal solution for Small Cell Densification deployments in urban and suburban environments
  • Ordering options for multiple mounting brackets, including simple wall mounting or Dual-Axis adjustment bracket (up to 45° of tilt). Which makes it ideal for mounting on utility, lighting and traffic poles
  • Exceeds minimum PIM performance requirements
  • Ordering options for 7/16 DIN connector or the new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connectors

Overview

 

The CCI multiband 65° x 65° array is a four port antenna Small Cell antenna, with two wide high band ports covering 1695-2690 MHz and two wide low band ports covering 694-960 MHz. The CCI 65° x 65° antenna provides 2x2 Multiple-input-Multiple-output (MIMO) across the low band and high band ports. The CCI 65° x 65° Small Cell antenna is an ideal choice for Microcells, Small Cell and oDAS densification deployments in urban and suburban environments where antenna size and count are restricted. The CCI 65° x 65° Small Cell antenna provides a fixed 0° EDT, across all frequencies.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • Microcells and Small Cells in Urban, Suburban and other visually sensitive environments
  • Ideal for Macro to Small Cell Coverage Transition Zones
  • Outdoor Distributed Antenna Systems (oDAS), neutral host in venues, campuses and other outdoor coverage applications

Electrical

Ports 2 × Low Band Ports for 694-960 MHz
Frequency Range 694-806 MHz 824-896 MHz 880-960 MHz
Gain1 8.2 dBi 8.2 dBi 8.6 dBi
Gain (Average)2 7.9 dBi 8.0 dBi 8.4 dBi
Azimuth Beamwidth (-3dB) 70° 65° 59°
Elevation Beamwidth (-3dB) 79° 74° 68°
Electrical Downtilt
Front-to-Back Ratio @180° > 25 dB > 22 dB > 22 dB
Cross-Polar Discrimination (at Peak) > 24 dB > 20 dB > 18 dB
Cross-Polar Port-to-Port Isolation > 22 dB > 22 dB > 18 dB
Voltage Standing Wave Ratio(VSWR) < 1.6:1 < 1.6:1 < 1.6:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 80 watts 80 watts 80 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

 

Ports 2 × High Band Ports for 1695-2690 MHz
Frequency Range 1695-1880 MHz 1850-1990 MHz 1920-2180 MHz 2300-2400 MHz 2496-2690 MHz
Gain1 8.6 dBi 8.6 dBi 8.5 dBi 8.6 dBi 9.3 dBi
Gain (Average)2 8.5 dBi 8.4 dBi 8.4 dBi 8.4 dBi 9.0 dBi
Azimuth Beamwidth (-3dB) 57° 61° 64° 70° 61°
Elevation Beamwidth (-3dB) 62° 64° 68° 73° 60°
Electrical Downtilt
Front-to-Back Ratio @180° > 32 dB > 32 dB > 32 dB > 32 dB > 35 dB
Cross-Polar Discrimination (at Peak) > 28 dB > 28 dB > 28 dB > 26 dB > 26 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.75:1 < 1.75:1 < 1.75:1 < 1.75:1 < 1.75:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 80 watts 80 watts 80 watts 80 watts 80 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

Mechanical

Dimensions (L×W×D) 11.8×11.8×6.1 in (300×300×156 mm)
Survival Wind Speed > 125 mph (> 201 kph)
Front Wind Load 30 lbs (132 N) @ 100 mph (161 kph)
Side Wind Load 15 lbs (69 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 1.2 ft2 (0.1 m2)
Weight* 4.6 lbs (2.1 kg)
Connector 4 × 7-16 DIN female long neck or 4.3-10 Female
Wall Mount (fixed) 0.375 in (10 mm) diameter hardware recommended
Wall Mount Tilt 0.375 in (10 mm) diameter hardware recommended
Mounting Pole 2 to 4.5 in (5 to 11 cm)
* Weight excludes mounting
Bottom View  ODA65F-KE1AA ODA65F-KE1AB
  PI ODA65FKE1AA Bottom  PI ODA65FKE1AB bottom
 
Connector Spacing ODA65F-KE1AA ODA65F-KE1AB
  PI ODA65FKE1AA connectorspacing  PI ODA65FKE1AB connectorspacing
Mounting Kit Views      
  PI ODA65FKE1A MBK09 back PI ODA65FKE1A MBK08 back PI ODA65FKE1A MBK08 MBC07 pole back
   MBK-09  MBK-08  MBK-08 with optional MBC-07

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
PI ODA65FKE1A legend 20160114 ODA65RKE1A AP 737 AZEL0 ODA65RKE1A AP 896 AZEL0
  737 MHz Azimuth with Elevation 0º 896 MHz Azimuth with Elevation 0º
PI ODA65FKE1A legend 20160114 ODA65RKE1A AP 1780 AZEL0 ODA65RKE1A AP 2542 AZEL0
  1780 MHz Azimuth with Elevation 0º 2542 MHz Azimuth with Elevation 0º
 

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

ODA65F-KE1AA-K Antenna with 7-16 DIN connectors and MBK-09 non tilting wall mount
ODA65F-KE1AB-K Antenna with 4.3-10 connectors and MBK-09 non tilting wall mount
ODA65F-KE1AA-K1 Antenna with 7-16 DIN connectors and MBK-08 wall mount (adjustable tilt in both directions up to 45°)
ODA65F-KE1AB-K1 Antenna with 4.3-10 connectors and MBK-08 wall mount (adjustable tilt in both directions up to 45°)
ODA65F-KE1AA-K2 Antenna with 7-16 DIN connectors with MBK-08 and MBC-07 for pole mount (adjustable tilt in both directions up to 45°)
ODA65F-KE1AB-K2 Antenna with 4.3-10 connectors with MBK-08 and MBC-07 for pole mount (adjustable tilt in both directions up to 45°)
MBK-09 Fixed wall mount kit
MBK-08 Adjustable wall mount kit
MBC-07 Pole mount clamp for use with MBK-08

Standards & Compliance

Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Federal Communication Commission (FCC) Part 15 Class B, ISO 9001:2008
 
ISO9001Logo RoHS logo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax