Indoor DAS Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Small Cell IDA Antenna IDA-65F-Z-H1-Cx
                
       
       
         
  PI IDA65FZH1C4 front PI IDA65FZH1C4 side  
  • Single port covering bands between 698 to 2690 MHz
  • Over 30 dB front to back ratio
  • Simple ceiling mount installation
  • Linear polarization can be Vertical or Horizontal based on mounting orientation of the antenna
  • RF Pigtail for easy connection
  • Low Passive Intermodulation Products
  • Patented architecture minimizes interference
  • Minimizes interference with macro networks
  • 7-16 DIN or type N connector options

Overview

 

The CCI AccuBeam Indoor Antenna is an LTE ready multi-band antenna that covers the full 698 MHz thru 2700 MHz spectrum. The AccuBeam Antenna employs a unique patented architecture that provides extremely high front to back isolation and thus is an ideal candidate for reducing cell-to-cell interference in indoor multi-sector deployments. This antenna can be used in buildings and at sporting and entertainment venues where it is desirable to limit the spillover from the indoor DAS or Small Cell system from the surrounding macro network. Furthermore, the antenna can be used within buildings and venues where multiple sectors are deployed to minimize interference between sectors that reuse the same frequencies. Such an approach enhances data transfer rates within LTE, UMTS and EVDO network sectors and addresses “hotspots” in indoor mobile wireless operator networks.
The AccuBeam Antenna is an ideal candidate for both iDAS and indoor small cell applications where the unique beam shaping technology provides high front to back isolation, minimizing interference between sectors thus increasing the carrier to interference plus noise (CINR) ratio and lowering soft handover losses in LTE, UMTS/HSPA+ and CDMA/EVDO networks. The antenna is housed in an aesthetically pleasing enclosure suitable for indoor office environments.
CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • Multi-sector multi-band indoor in-building DAS and Small Cell deployments
  • Multi-sector multi-band indoor sporting and entertainment venues
  • VIP suites in stadiums
  • Adjacent sectors in buildings

Electrical

Ports 1× Port for 698-960 MHz and 1710-2700 MHz
Frequency Range 698-960 MHz 1710-2700 MHz
Gain 7.8 dBi 8.5 dBi
Azimuth Beamwidth (-3dB) 65° 50°
Elevation Beamwidth (-3dB) 75° 75°
Electrical Downtilt 45° 45°
Front-to-Back Ratio @180° > 30 dB > 28 dB
Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 2:1 < 2:1
Passive Intermodulation (2×5W) ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 40 watts 40 watts
Polarization Linear Horizontal Linear Horizontal
Input Impedance 50 ohms 50 ohms

Mechanical

Dimensions (L×W×D) 10.0×10.7×9.8 in (254×272×249 mm)
Weight 1.4 lbs (0.6 kg)
Connector 1× N female cable or 7-16 DIN female cable
Mounting Stud 1-8 UNC
Mounting Hole 1.125 in  ID (29 mm)
Back and Top View    
  PI IDA65FZH1C4 back
PI IDA65FZH1C4 top
Connector Spacing  
   PI IDA65FZH1 drawing

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
AP AZ EL LEGEND 20150727 IDA65FZH1 AP 737 AZ IDA65FZH1 AP 737 EL45
  737 MHz Azimuth 737 MHz Elevation 45º
AP AZ EL LEGEND 20150727 IDA65FZH1 AP 934 AZ IDA65FZH1 AP 934 EL45
  934 MHz Azimuth 934 MHz Elevation 45º
AP AZ EL LEGEND 20150727 IDA65FZH1 AP 1920 AZ IDA65FZH1 AP 1920 EL45
  1920 MHz Azimuth 1920 MHz Elevation 45º
 

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

IDA-65F-Z-H1-C1 1 foot (0.3 m) antenna with 65° azimuth beamwidth and 7-16 DIN female connector pigtail
IDA-65F-Z-H1-C4 1 foot (0.3 m) antenna with 65° azimuth beamwidth and N female connector pigtail
IDA-65F-Z-H1-C1-K 1 foot (0.3 m) antenna with 65° azimuth beamwidth, 7-16 DIN female connector for ceiling/wall mount and includes plastic nut and large diameter flat washer
IDA-65F-Z-H1-C4-K 1 foot (0.3 m) antenna with 65° azimuth beamwidth, N female connector for ceiling/wall mount and includes plastic nut and large diameter flat washer

Standards & Compliance

Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax