Bi-Sector Array Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Bi-SectorTM Array BSA33R-U6A
                
       
       
         
  PI BSA33RU6AA FRONT ISO PI BSA33RU6AA REAR ISO  
  • Six foot (1.9m), Singleband, eight port Bi-Sector Antenna. Deploying a pair of CCI’s Patented Asymmetrical 33° Shaped Beams covering 1695-2400 MHz frequencies 
  • Eight wide high band ports covering 1695-2400 MHz
  • Narrow Enclosure, 12.9” (327 mm) width. Narrowest Enclosure in the Industry for this type of Antenna
  • Full Spectrum Compliance for 1695-2400 MHz
  • LTE Optimized Asymmetric Shaped Beams for improved LTE data throughput by minimizing beam crossover, providing for an efficient use of valuable radio capacity and frequency spectrum. Essential for today’s LTE Data Networks
  • Exceeds minimum PIM performance requirements
  • Options to order with 4.3-10 connector or 7/16 DIN connectors
  • Equipped with Two Field Replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET)

Overview

 

This version of the CCI Bi-Sector Singleband Array is an eight port antenna, with eight wide high band ports covering 1695-2400 MHz. The CCI Bi-Sector array uses a pair of CCI’s Patented Asymmetric 33° Shaped Beams. The CCI Bi-Sector Array provides the capability to deploy Dual 4×4 Multiple-input Multiple-output (MIMO) in the high band array. The CCI Bi-Sector Array utilizes two RET controllers, with a separate RET control for each pair of CCI’s Patented Asymmetric Shaped Beams.

The CCI Bi-Sector Singleband Array, allow operators to reduce antenna count and replace existing 65° networks, while increasing cell site capacity and LTE data throughput by minimizing overlap between CCI’s Patented Asymmetric 33° Shaped Beams. This design approach lowers interference between sectors. All of this is achieved through a single panel array, producing significant CAPEX and OPEX cost savings for the operator.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • Dual 4x4 MIMO on High Band
  • Ready for Network Standardization on 4.3-10 connectors
  • Ideal Antenna Solution for structurally constrained sites, where data throughput, capacity and limited spectrum is a concern
  • With CCI’s Hybrid Bi-Sector Antenna, wireless operators can connect multiple platforms to a single antenna, reducing tower load, lease expense, deployment time and installation cost

Electrical

Ports 8 × High Band Ports for 1695-2400 MHz
Frequency Range 1695-1880 MHz 1850-1990 MHz 1920-2180 MHz 2300-2400 MHz
Gain1 17.4 dBi 17.9 dBi 18.6 dBi 19.0 dBi
Gain (Average)2 16.6 dBi 17.3 dBi 17.7 dBi 18.6 dBi
Azimuth Beamwidth (-3dB) 37° 35° 33° 29°
Elevation Beamwidth (-3dB) 9.9° 9.1° 8.6° 7.7°
Electrical Downtilt 0° to 10° 0° to 10° 0° to 10° 0° to 10°
Elevation Sidelobes (1st Upper) < -17 dB < -17 dB < -17 dB < -18 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 32 dB > 32 dB > 32 dB > 32 dB
Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB > 25 dB > 25 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

Mechanical

Dimensions (L×W×D) 76.3×12.9×6.2 in (1937×327×158 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 236 lbs (1050 N) @ 100 mph (161 kph)
Side Wind Load 133 lbs (591 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 9.2 ft2 (0.9 m2)
Weight* 45.0 lbs (20.4 kg)
RET System Weight 3.3 lbs (1.5 kg)
Connector 8 × 7-16 DIN long neck female or 4.3-10 female
Mounting Pole 2 to 5 in (5 to 12 cm)
*Weight excludes mounting and RET
Bottom View  
   PI BSA33RU6AA BOT WITH LABEL
Connector Spacing  
   PI BSA33RU6AA CONNECTOR SPACING
  BSA33R-U6A Element and RET configuation (Type 1 External RET)
   PI BSA33RU6AA ELEMENT RET CONFIG

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
Left Right Elevation BSA33RU6AA AP 1920 AZEL5 BSA33RU6AA AP 2110 AZEL5
  1920 MHz Azimuth with Elevation 5° 2110 MHz Azimuth with Elevation 5°
Model BSA-RET200   Remote Electrical Tilt System (RET) (Type 1)
MBK-01   MBK-01
QPA-CBK-AG-RRU   Bi-Sector antenna with 2 RET to RRU AISG cable kit
QPA-CBK-RA-AG-RRU   Bi-Sector antenna with 2 RET to RRU AISG right angle cable kit 
SCU-AISG-P   Portable AISG 2.0 Site Control Unit

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

 
BSA33R-U6AA-K Six foot (1.9 m) Bi-Sector Antenna Array with 7-16 DIN long neck female connector, 2 factory installed external BSA-RET200 RET actuators (Type 1 External) and MBK-01 mounting brackets
BSA33R-U6AB-K Six foot (1.9 m) Bi-Sector Antenna Array with 4.3-10 female connector, 2 factory installed external BSA-RET200 RET actuators (Type 1 External) and MBK-01 mounting brackets
MBK-01 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Type 1 remote electrical tilt actuator
QPA-CBK-AG-RRU Two RET Bi-Sector antenna to RRU AISG cable kit
QPA-CBK-RA-AG-RRU Two RET Bi-Sector antenna to RRU AISG right angle cable kit

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax