Bi-Sector Array Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Hybrid Bi-SectorTM Array HBSA33R-KE4A
                
       
       
         
  PI HBSA33RKE4AA FRONT ISO  PI HBSA33RKE4AA REAR ISO  
  • Four foot (1.3m), multiband, six port Hybrid Bi-Sector Antenna. Deploying a high performing 65° azimuth beamwidth covering 698-960 MHz and a pair of CCI’s Patented Asymmetrical 33° Shaped Beams covering 1695-2690 MHz frequencies
  • Four wide high band ports covering 1695-2690 MHz and two wide low band ports covering 698-960 MHz in a single antenna
  • Narrow Enclosure, 13.7” (348mm) width. Narrowest Enclosure in the Industry for this type of Antenna
  • Full Spectrum Compliance for 698-960 MHz / 1695-2690
  • LTE Optimized Asymmetric Shaped Beams for improved LTE data throughput by minimizing beam crossover, providing for an efficient use of valuable radio capacity and frequency spectrum
  • LTE Optimized FBR, SPR and Boresight/Sector XPD Performance. Essential for today’s LTE Data Networks
  • Exceeds minimum PIM performance requirements
  • Equipped with new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
  • Equipped with Three Field Replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET)

 

Overview

 

This CCI Hybrid Bi-Sector Multiband Array is a six port antenna, which is designed to provide maximum deployment flexibility. With four wide high band ports (two ports per beam) covering 1695-2690 MHz across two 33° asymmetrically shaped beams and two wide low band ports covering 698-960 MHz across a 65° HBW.
The antenna implements CCI’s proven “Asymmetrical Beam for Spectrum Efficiency” patent which enables wireless operators to re-use their valuable spectrum and significantly increase capacity. The CCI Hybrid Bi-Sector Array provides two 33° asymmetrically shaped beams designed to maximize coverage while minimizing interference and overlap in dense LTE environments.
With this configuration, the antenna is capable of providing 2x2 Multiple-input Multiple-output (MIMO) across the 65° Low Band ports and Dual 2x2 Multiple-input Multiple-output (MIMO) across the two 33° asymmetrically shaped beams.
CCI’s Hybrid Bi-Sector Array antennas allow operators to reduce antenna and site deployments, for either six sector or greenfield deployments, by replacing traditional 65° antennas with CCI’s Patented Bi-Sector Array antennas containing two 33° Asymmetric Beams. This is achieved through a single panel array producing significant CAPEX and OPEX cost savings for the operator, while increasing cell site capacity and LTE data throughput.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

 

Applications

 
  • Dual 2x2 MIMO on High Band and 2x2 MIMO on Low Band
  • Ready for Network Standardization on 4.3-10 connectors
  • Ideal Antenna Solution for structurally constrained sites, where data throughput, capacity and limited spectrum is a concern
  • With CCI’s Hybrid Bi-Sector Antenna, wireless operators can connect multiple platforms to a single antenna, reducing tower load, lease expense, deployment time and installation cost

Electrical

Ports 2 × Low Band Ports for 698-960 MHz 
Frequency Range 698-806 MHz 790-862 MHz 824-896 MHz 880-960 MHz
Gain1 13.0 dBi 13.1 dBi 13.2 dBi 13.3 dBi
Gain (Average)2 12.7 dBi 12.7 dBi  12.9 dBi 13.0 dBi
Azimuth Beamwidth (-3dB) 68° 74° 71° 66°
Elevation Beamwidth (-3dB) 19.7° 17.7° 17.0° 16.0°
Electrical Downtilt 0° to 14° 0° to 14° 0° to 14° 0° to 14°
Elevation Sidelobes (1st Upper) < -19 dB < -19 dB < -19 dB < -18 dB
Front-to-Back Ratio @180° > 30 dB > 35 dB  > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 30 dB > 32 dB  > 32 dB > 32 dB
Cross-Polar Discrimination (at Peak) > 23 dB > 25 dB > 25 dB > 24 dB
Cross-Polar Discrimination (at 3 dB)2 20.4 dB 20.1 dB  18.5 dB 17.0 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio (VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts 500 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

 

Ports 4 × High Band Ports for 1695-2690 MHz
Frequency Range 1695-1880 MHz 1850-1990 MHz 1920-2180 MHz 2300-2400 MHz 2496-2690 MHz
Gain1 18.2 dBi 17.7 dBi 19.0 dBi 19.2 dBi 19.5 dBi
Gain (Average)2 17.3 dBi 18.1 dBi 18.4 dBi 18.6 dBi 18.9 dBi
Azimuth Beamwidth (-3dB) 36° 33° 31° 29° 27°
Elevation Beamwidth (-3dB) 8.0° 7.2° 6.7° 6.0° 5.7°
Electrical Downtilt 0° to 10° 0° to 10°  0° to 10° 0° to 10° 0° to 10° 
Elevation Sidelobes (1st Upper) < -18 dB < -17 dB < -17 dB < -17 dB < -18 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 32 dB > 33 dB > 35 dB > 34 dB > 34 dB
Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB 
Cross-Polar Discrimination (at 3 dB°)2 18.8 dB 18.1 dB 16.3 dB 13.1  dB 15.7 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

Mechanical

Dimensions (L×W×D) 48.3×13.7×8.5 in (1227×348×216 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 147 lbs (652 N) @ 100 mph (161 kph)
Side Wind Load 98 lbs (435 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 5.7 ft2 (0.5 m2)
Weight1 35.2 lbs (16.0 kg)
RET System Weight 5.0 lbs (2.3 kg)
Connector 6 ×4.3-10 female
Mounting Pole 2 to 5 in (5 to 12 cm)
1 Weight excludes mounting kit and RET
Bottom View HBSA33R-KE4AA
  PI HBSA33R KE4A BOT LABEL
Connector Spacing HBSA33R-KE4AA
  PI HBSA33RKE4AA CONNECTOR SPACING
RET to Element Configuration HBSA33R-KE4AA
  PI HBSA33RKE4AA RET CONFIG

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
APLegend-Low-BG HBSA33RKE4AA AP 740 AZ HBSA33RKE4AA AP 740 EL7
  740 MHz Azimuth  740MHz Elevation 7°
APLegend-Low-BG HBSA33RKE4AA AP 894 AZ HBSA33RKE4AA AP 894 EL7
  894 MHz Azimuth 894 MHz Elevation 7°
APLegend-High HBSA33RKE4AA AP 1755 AZ HBSA33RKE4AA AP 1755 EL5
  1755 MHz Azimuth Bi-Sector Ports 1755 MHz Elevation 5° Bi-Sector Ports
APLegend-High HBSA33RKE4AA AP 1930 AZ HBSA33RKE4AA AP 1930 EL5
  1930 MHz Azimuth Bi-Sector Ports 1930 MHz Elevation 5° Bi-Sector Ports
APLegend-High HBSA33RKE4AA AP 2345 AZ HBSA33RKE4AA AP 2345 EL5
  2345 MHz Azimuth Bi-Sector Ports 2345 MHz Elevation 5° Bi-Sector Ports
APLegend-High HBSA33RKE4AA AP 2650 AZ HBSA33RKE4AA AP 2650 EL5
  2650 MHz Azimuth 2650 MHz Elevation 5°
MBK-02   MBK-02 Mounting Kit
BSA-RET200   Remote Electrical Tilt System (RET)
HPA-CBK-AG-RRU   RRU AISG cable kit for three RET antenna
HPA-CBK-RA-AG-RRU   RRU AISG right angle cable kit for three RET antenna
SCU-AISG-P   Portable AISG 2.0 Site Control Unit

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

HBSA33R-KE4AA-K Four foot (2.7 m) Hybrid Bi-Sector Antenna Array with 4.3-10 female connector, 3 factory installed external BSA-RET200 RET actuators (Type 1 External) and MBK-02 mounting brackets
MBK-02 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
HPA-CBK-AG-RRU RRU AISG cable kit for three RET antenna
HPA-CBK-RA-AG-RRU RRU AISG right angle cable kit for three RET antenna

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax