Bi-Sector Array Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Hybrid Bi-SectorTM Array HBSA65R-KUE9B
                
       
       
         
  PI HBSA65RKUE9A FRONT ISO TUBE PI HBSA65RKUE9A REAR ISO TUBE  
  • Nine foot (2.7 m), multiband, eight port Hybrid Bi-Sector Antenna. Deploying two high performing 65° HBW covering 694-960 MHz and 1695-2690 MHz frequency bands and a pair of CCI’s Patented Asymmetrical 33° Shaped Beams covering 1695-2400 MHz frequencies
  • Two wide high band ports covering 1695-2690 MHz, four separate high band ports covering 1695-2400 MHz and two wide low band ports covering 694-960 MHz in a single antenna
  • Narrow Enclosure, 13.4” (340 mm) width. Narrowest Enclosure in the Industry for this type of Antenna.
  • Full Spectrum Compliance for 694-960 MHz / 1695-2690 Mhz
  • LTE Optimized Asymmetric Shaped Beams for improved LTE data throughput by minimizing beam crossover, providing for an efficient use of valuable radio capacity and frequency spectrum
  • LTE Optimized FBR, SPR and Boresight/Sector XPD Performance. Essential for today’s LTE Data Networks
  • Exceeds minimum PIM performance requirements
  • Ordering options include either Four Field Replaceable, integrated AISG 2.0 compliant External (Type 2) Remote Electrical Tilt (RET) or Four Variable Electrical Control Knobs (VET)

 

Overview

 

This CCI Hybrid Bi-Sector Array has a unique configuration, which is designed to provide maximum deployment flexibility. This is an eight port antenna which contains two low band ports covering 694-960 MHz across a 65° HBW, two high band ports covering 1695-2690 MHz across a 65° HBW and four high band ports (two ports per beam) covering 1695-2400 MHz across two 33° asymmetrically shaped beams.

The antenna implements CCI’s proven “Asymmetrical Beam for Spectrum Efficiency” patent which enables wireless operators to re-use their valuable spectrum and significantly increase capacity. The CCI Hybrid Bi-Sector Array provides two 33° asymmetrically shaped beams designed to maximize coverage while minimizing interference and overlap in dense LTE environments.  

With this unique configuration, the antenna is capable of providing 2x2 Multiple-input Multiple-output (MIMO) across the 65° Low Band ports, 2x2 Multiple-input Multiple-output (MIMO) across the 65° High Band ports and Dual 2×2 Multiple-input Multiple-output (MIMO) across the two 33° asymmetrically shaped beams.   

CCI’s Hybrid Bi-Sector Array antennas allow operators to reduce antenna and site deployments, for either six sector or greenfield deployments, by replacing traditional 65° antennas with CCI’s Patented Bi-Sector Array antennas containing two 33° Asymmetric Beams. This is achieved through a single panel array producing significant CAPEX and OPEX cost savings for the operator, while increasing cell site capacity and LTE data throughput. 

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

 

Applications

 
  • 2x2 MIMO on High Band 65° HBW and 2x2 MIMO on Low Band 65° HBW and Two 2x2 MIMO on High Band Split Beams
  • Ideal Antenna Solution for structurally constrained sites, where data throughput, capacity and limited spectrum is a concern 
  • With CCI’s Hybrid Bi-Sector Antenna, wireless operators can connect multiple platforms to a single antenna, reducing tower load, lease expense, deployment time and installation cost

Electrical

Ports 2 × Low Band Ports for 694-960 MHz 2 × High Band Ports for 1695-2690 MHz
Frequency Range 694-806 MHz 824-960 MHz 1695-1880 MHz 1920-2180 MHz 2300-2400 MHz 2496-2690
Gain1 16.3 dBi 16.5 dBi 16.6 dBi 16.7 dBi 16.9 dBi 16.9 dBi
Gain (Average)2 15.9 dBi 16.2 dBi 16.2 dBi 16.1 dBi 16.2 dBi 16.2 dBi
Azimuth Beamwidth (-3dB) 68° 68° 61° 69° 65° 59°
Elevation Beamwidth (-3dB) 8.2° 6.6° 7.4° 6.2° 5.4° 5.3°
Electrical Downtilt 2° to 10° 2° to 10° 0° to 9° 0° to 9° 0° to 9° 0° to 9°
Elevation Sidelobes (1st Upper) < -18 dB < -18 dB < -18 dB < -18 dB < -17 dB < -17 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB > 35 dB > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 32 dB > 35 dB > 32 dB > 33 dB > 31 dB > 31 dB
Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB > 20 dB > 17 dB > 22 dB > 20 dB
Cross-Polar Discrimination (at ± 60°)2 11.4 dB 12.5 dB 13.0 dB 12.6 dB 10.2 dB 7.5 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts 300 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

 

Ports 4 × High Band Ports for 1695-2400 MHz
Frequency Range 1695-1880 MHz 1920-2180 MHz 2300-2400 MHz
Gain1 19.1 dBi 19.7 dBi 19.8 dBi
Gain (Average)2 18.1 dBi 19.1 dBi 19.2 dBi
Azimuth Beamwidth (-3dB) 35° 30° 27°
Elevation Beamwidth (-3dB) 7.2° 6.2° 5.8°
Electrical Downtilt 0° to 10° 0° to 10° 0° to 10°
Elevation Sidelobes (1st Upper) < -18 dB < -17 dB < -17 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 32 dB > 32 dB > 32 dB
Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB > 25 dB
Cross-Polar Discrimination (at 3 dB°)2 17.8 dB 14.6 dB 14.9 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground
1Peak gain across sub-bands.
2Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.


Mechanical

Dimensions (L×W×D) 106.3×13.4×8.5 in (2700×340×216 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 362 lbs (1611 N) @ 100 mph (161 kph)
Side Wind Load 254 lbs (1132 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 14.1 ft2 (1.3 m2)
Weight1 67.0 lbs (30.4 kg)
RET System Weight 6.6 lbs (3.0 kg)
Weight (VET model)2 65.7 lbs (29.9 kg)
Connector 8 × 7-16 DIM long neck female
Mounting Pole 2 to 5 in (5 to 12 cm)
1 Weight excludes mounting and RET
2 Weight excludes mounting
Bottom View HBSA65R-KUE9BA HBSA65V-KUE9BA
  PI HBSA65RKUE9A bot TUBE LABEL PI HBSA65VKUE9A bot TUBE LABEL
Connector Spacing HBSA65R-KUE9BA and HBSA65V-KUE9BA
  PI HBSA65RKUE9B Connector Spacing
RET to Element Configuration HBSA65R-KUE9BA
  PI HBSA65RKUE9B RET Element Diagram
RET to Element Configuration HBSA65V-KUE9BA
  PI HBSA65VKUE9B RET Element Diagram

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
APLegend-Low-BG HBSA65RKUE9BA AP 740 AZ HBSA65RKUE9BA AP 740 EL6
  740 MHz Azimuth 740MHz Elevation 6°
APLegend-Low-BG HBSA65RKUE9BA AP 869 AZ HBSA65RKUE9BA AP 869 EL6
  869 MHz Azimuth 869 MHz Elevation 6°
APLegend-High HBSA65RKUE9BA AP 1940 AZ U HBSA65RKUE9BA AP 1940 EL5 U
  1940 MHz Azimuth Bi-Sector Ports 1940 MHz Elevation 5° Bi-Sector Ports
APLegend-High HBSA65RKUE9BA AP 2360 AZ U HBSA65RKUE9BA AP 2360 EL5 U
  2360 MHz Azimuth Bi-Sector Ports 2360 MHz Elevation 5° Bi-Sector Ports
APLegend-High HBSA65RKUE9BA AP 1755 AZ E HBSA65RKUE9BA AP 1755 EL5 E
  1755 MHz Azimuth Bi-Sector Ports 1755 MHz Elevation 5° Bi-Sector Ports
APLegend-High HBSA65RKUE9BA AP 2630 AZ E HBSA65RKUE9BA AP 2630 EL5 E
  2630 MHz Azimuth 2630 MHz Elevation 5°
MBK-01   MBK-01 Mounting Kit
BSA-RET200   Remote Electrical Tilt System (RET)
KUE-CBK-AG-RRU   AISG Cable set for HyBird KUE Bi-Sector Antenna
KUE-CBK-RA-AG-RRU   AISG Right Angle Cable set for HyBird KUE Bi-Sector Antenna
SCU-AISG-P   Portable AISG 2.0 Site Control Unit

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

HBSA65R-KUE9BA-K Nine foot (2.7 m) Hybrid Bi-Sector Antenna Array with 7-16 DIN long neck female connector, 4 factory installed external BSA-RET200 RET actuators (Type 1 External) and MBK-01 mounting brackets
HBSA65V-KUE9BA-K Nine foot (2.7 m) Hybrid Bi-Sector Antenna Array with 7-16 DIN long neck female connector, 4 factory installed manual (VET) knobs and MBK-01 mounting brackets
MBK-01 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
KUE-CBK-AG-RRU Four RET, KUE antenna to RRU AISG cable kit
KUE-CBK-RA-AG-RRU Four RET, KUE antenna to RRU AISG right angle cable kit

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax