Bi-Sector Array Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Hybrid Multi-Band Antenna Array HBSA-M65R-KU-H8
                
       
       
         
  PI HBSAM65RKUH8 front iso PI HBSAM65RKUH8 REAR iso  
  • Unique hybrid phased array combines a standard 65° pattern for the 698-960 MHz frequency band with CCI’s patented asymmetric 33° Bi-Sector Array beams (optimized for greenfield deployments or matching existing cloverleaf networks) for the 1695-2360 MHz band
  • Slim and low weight single panel design supporting 3 beams without mount changes
  • Independent adjustable beams provide unmatched optimization flexibility
  • Separate Low-band and High-band ports
  • 3GPP/AISG 2.0 compliant
  • Daisy chaining capability
  • Software upgradeable
  • Rugged, weather resistant and highly reliable internal design
  • Multi band applications – 700 MHz, SMR 800 MHz, Cellular 850 MHz, 900 MHz, PCS 1900 MHz, AWS/AWS-3 1695/2180 MHz, WCS 2305/2360 MHz
  • Enables efficient evolution of wireless networks
  • Increase site capacity through higher order sectorization
  • Avoid carrier-adds and building of new capacity sites
  • Boosts data throughput by lowering interference
  • Unique hybrid phased array design, maximizes coverage in a standard tri-sector cell plan
  • Provides remote control of electrical downtilt of antenna for easier optimization

Overview

 

The CCI RET Series Hybrid Multi Band Antenna Array is an LTE ready hybrid phased array that supports multiple sectors (one low band, two high bands) from a single antenna and provides capability for 700 MHz , SMR 800 MHz, Cellular 850 MHz, 900 MHz, PCS 1900 MHz, AWS/AWS-3 1695/2180 MHz and WCS 2300 MHz coverage in a single, compact enclosure. Our unique hybrid design, 8 ft (2.2 m) high and 13.7 inches (0.3 m) wide, combining standard 65° and patented bi-sector technology, maximizes coverage in a standard tri-sector cell plan, provides optimized overlap between pairs of asymmetric beams, lowers soft handover losses in UMTS/HSPA+ and CDMA/EVDO systems, and minimizes interference between sectors. Such an approach enhances data transfer rates within UMTS/LTE and EVDO network sectors and addresses “hotspots” in mobile wireless operator networks for SMR, GSM, CDMA, UMTS and LTE technologies.
The remote electrical tilt (RET) Series Multi Band Hybrid Bi-Sector Array enables operators to remotely control the electrical down-tilt of the antenna in the field with sealed AISG compliant RET actuators. The CCI RET system is designed to meet the reliability, flexibility and efficiency requirements in a wide range of environments. The RET actuators are fully AISG compliant, software upgradeable, daisy chaining capable and fully weather resistant. The remote electrical capability allows independent adjustment of sub-beams for easier optimization.
The single panel design of the hybrid phased array offers the opportunity to reduce antenna count and directly replaces an existing 65° antenna. The new coverage that matches the existing footprint minimizes the need for optimization and adjacent site changes, and allows for significant CAPEX and OPEX cost savings.
CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • Upgrade of data-throughput or capacity constrained sites
  • Spectrum limited markets
  • Deferral of CDMA/EVDO or UMTS//HSPA+ carrier adds
  • Spectrum clearing and refarming

Electrical

Ports 2 × Low Band Ports for 698-960 MHz
Frequency Range 698-806 MHz 824-896 MHz 880-960 MHz
Gain 15.0 dBi 15.3 dBi 15.3 dBi
Azimuth Beamwidth (-3dB) 66° 64° 60°
Elevation Beamwidth (-3dB) 10.2° 8.8° 8.3°
Electrical Downtilt 2° to 10° 2° to 10° 2° to 10°
Elevation Sidelobes (1st Upper) < -17 dB < -17 dB < -17 dB
Front-to-Back Ratio @180° > 30 dB > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 30 dB > 30 dB > 30 dB
Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB > 25 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts 500 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground

 

Ports 4 × High Band Ports for 1695-2360 MHz
Frequency Range 1850-1990 MHz 1695-1780/2110-2180 MHz 2305-2360 MHz
Gain 18.4 dBi 17.4 dBi 19.1 dBi 19.4 dBi
Azimuth Beamwidth (-3dB) 34° 38° 30° 28°
Elevation Beamwidth (-3dB) 6.2° 6.7° 5.4° 4.8°
Electrical Downtilt 0° to 8° 0° to 8° 0° to 8° 0° to 8°
Elevation Sidelobes (1st Upper) < -19 dB < -18 dB < -19 dB < -18 dB
Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 35 dB > 35 dB > 35 dB > 35 dB
Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB > 25 dB > 25 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground

Mechanical

Dimensions (L×W×D) 87.8×13.7×8.5 in (2231×348×216 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 294 lbs (1307 N) @ 100 mph (161 kph)
Side Wind Load 201 lbs (892 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 11.5 ft2 (1.1 m2)
Weight * 55 lbs (25 kg)
RET System Weight 5.0 lbs (2.3 kg)
Connector 6× 7-16 DIN female long neck
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting and RET
Bottom View   RET Connection Diagram
   PI HBSAM65RKUH4 bottom PI HBSAM65RKUH4H6H8 RET
Connector Spacing  
  DD HBSAM65RBUDUKUH4H6H8 CONNECTORDIAGRAM

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
  AP HBSAM65RKUH8 725 AZEL7 AP HBSAM65RKUH8 862 AZEL7
  725 MHz Azimuth / Elevation 7°  862 MHz Azimuth / Elevation 7°
  AP HBSAM65RKUH6 1920 AZEL4   
  1920 MHz Azimuth / Elevation 4°  
Model BSA-RET200   Remote Electrical Tilt System (RET)

Software/Firmware

pdficon large Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

HBSA-M65R-KU-H8 8' (2.2 m) Hybrid Bi-Sector Antenna Array with 3 factory-installed RET200 actuators
HBSA-M65R-KU-H8-K Antenna kit with 3 factory installed RET actuators and MBK-01 mounting bracket
MBK-01 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
HPA-CBK-AG-RRU HexPort antenna to RRU AISG cable kit
HPA-CBK-RA-AG-RRU HexPort antenna to RRU AISG right angle cable kit

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax