Bi-Sector Array Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Multi-band Bi-SectorTM Array BSA-M65R-BUU-H4
                
       
       
         
  PI BSAM65RBUUH4 front iso 20150128 PI BSAM65RBUUH4 Rear iso 20150128  
  • Patented twin asymmetric beam 33° Bi-Sector array phase array over a frequency range of (698-896 MHz) and (1710-2360 MHz), optimized to match existing cloverleaf (65°) deployments.
  • 4 low band and 8 high band ports (2 low band and 4 high band for each beam)
  • Expanded coverage of WCS band for high band
  • Optimized beam shape for maximum LTE data throughput
  • Independent low-band and high-band remote electrical tilt for each beam provides unmatched optimization flexibility
  • 3GPP/AISG 2.0 compliant
  • Daisy chaining capability
  • Software upgradeable
  • Rugged, weather resistant and highly reliable internal design
  • Multi band applications – 700 MHz, SMR 800 MHz, Cellular 850 MHz, PCS 1900 MHz, AWS 1710/2155 MHz, WCS 2305/2360 MHz
  • Enables efficient evolution of wireless networks
  • Increase site capacity through higher order sectorization
  • Avoid carrier-adds and building of new capacity sites
  • Boosts data throughput by lowering interference
  • Unique phased array design, maximizes coverage in a standard tri-sector cell plan
  • Provides independent remote control of electrical downtilt for both high band and low band of each beam for ease of optimization

Overview

 

The CCI multi-band Twin HexPort Bi-SectorTM array is a dual beam antenna with full 700 MHz, SMR 800, Cellular, AWS, PCS and WCS band coverage. This four foot (1.3 m) antenna can be configured to deploy two asymmetric 33° beams each containing two low band ports covering 698-894 MHz and four high band ports covering 1710-2360 MHz in a single enclosure. With four high band ports in each sub-beam this antenna is ideally suited for implementation of 2x4 and 4x4 MIMO system configurations. The CCI multi-band Bi-SectorTM provides the capability to deploy two sectors of 4×4 Multiple-input Multiple-output (MIMO) in the high band. The Remote Electrical Tilt (RET) feature allows separate tilt control for the high and low band in each 33° beam, enabling maximum flexibility in network deployment.

CCI's unique patented bi-sector technology provides optimized overlap between the pairs of asymmetric beams, lowers soft handover losses in LTE, UMTS/HSPA+ and CDMA/EVDO systems, while minimizing interference between sectors. Fast roll-off of each of the outer beams and high front-to-back ratios ensure reduced interference. This patented approach enhances data transfer rates within LTE, UMTS and EVDO network sectors and addresses “hotspots” in mobile wireless operator networks.

The single panel design of the Bi-Sector Array offers the opportunity to reduce antenna count and directly replaces an existing 65° antenna without mount changes and avoids costly leasing and zoning changes. The enhanced coverage matches the existing sector footprint and minimizes the need for optimization and adjacent site changes, providing operators with significant CAPEX and OPEX cost savings.

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • Delivers increased capacity and data-throughput for sites that are performance or capacity constrained
  • Increase capacity without the need for new site builds or carrier adds and without using valuable spectrum resources
  • Efficient use of spectrum make it ideally suited for spectrum clearing and refarming
  • Two Sectors 4×4 MIMO for the high band and 2×2 MIMO for the low band

Electrical

Ports 4× Low Band Ports for 698-896 MHz 8× High Band Ports for 1710-2360 MHz
Frequency Range 698-806 MHz 824-896 MHz 1850-1990 MHz 1710-1780/2110-2180 MHz 2305-2360 MHz
Gain 15.1 dBi 16.1 dBi 17.3 dBi 16.7 dBi 17.9 dBi 17.8 dBi
Azimuth Beamwidth (-3dB) 35° 32° 31° 35° 28° 25°
Elevation Beamwidth (-3dB) 16.5° 14.5° 8.1° 9.0° 7.3° 6.8°
Electrical Downtilt 0° to 14° 0° to 14° 0° to 9° 0° to 9° 0° to 9° 0° to 9°
Elevation Sidelobes (1st Upper) < -17 dB < -17 dB < -18 dB < -18 dB < -18 dB < -18 dB
Front-to-Back Ratio @180° > 30 dB > 35 dB > 30 dB > 35 dB > 35 dB > 35 dB
Front-to-Back Ratio over ± 20° > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts 300 watts 300 watts 300 watts 300 watts
Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground DC Ground

Mechanical

Dimensions (L×W×D) 49.9×28.5×9.7 in (1267×723×245 mm)
Survival Wind Speed > 150 mph (> 240 kph)
Front Wind Load 303 lbs (1348 N) @ 100 mph (161 kph)
Side Wind Load 113 lbs (502 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 11.8 ft2 (1.1 m2)
Weight * 75.0 lbs (34.0 kg)
RET System Weight 6.6 lbs (3.0 kg)
Connector 12× 7-16 DIN female long neck
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting and RET
Bottom View    RET Connection Diagram
   PI BSAM65RBUUH4 bottom with labels 20150721  PI BSAM65RBUUH4 RET diagram 20150721
Connector Spacing  
   PI BSAM65RBUUH6 CONNECTORDIAGRAM

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
  AP BSAM65RBUUH4 761 AZEL7 AP BSAM65RBUUH4 849 AZEL7
  761 MHz Azimuth Elevation 7° 849 MHz Azimuth Elevation 7°
  AP BSAM65RBUUH4 1940 AZEL4  
  1940 MHz Azimuth Elevation 4°  
Model BSA-RET200   Remote Electrical Tilt System (RET)

Software/Firmware

pdficon large HPA-Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

BSA-M65R-BUU-H4 Four foot (1.3 m) Bi-Sector array, Multi-band Antenna and 4 factory installed BSA-RET200 RET actuators
BSA-M65R-BUU-H4-K Antenna kit with 4 factory installed RET actuators and MBK-02 mounting bracket
MBK-02 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200 Remote electrical tilt actuator
OPA-CBK-AG-RRU OctoPort antenna to RRU AISG cable kit
OPA-CBK-RA-AG-RRU OctoPort antenna to RRU AISG right angle cable kit

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
 
ISO9001Logo RoHS logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax