Bi-Sector Array Antennas

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Stadium Bi-SectorTM Array BSA-D65-15F005-22
                
       
       
         
  PI BSAD6515F00522 front iso 20150707 PI BSAD6515F00522 rear iso 20150707  
  • Two foot (0.6 m), eight port, dual beam antenna with patented asymmetrical beam shapes optimized for LTE
  • Two low band and two high band 33° beams to match existing 65° patterns, covering 790-960 MHz and 1710-2170 MHz
  • One pair of +45° and –45° cross-polarized ports for each beam
  • Compact and low weight single panel design supporting two beams in a single antenna
  • Fixed electrical downtilt of 5°
  • Dramatic increase in site capacity through higher order sectorization which offsets the need to build new sites
  • Boosts data throughput by minimizing interference and optimizing coverage
  • Sharp elevation beamwidth aides in network planning
  • Optimal elevation sidelobe performance
  • Exceeds minimum PIM performance requirements

Overview

 

The CCI multi-band Bi-SectorTM Stadium Antenna is a dual beam phased array with full LTE 800, Cellular 850, LTE 900, DCS 1800 and UMTS 2100 band coverage. With two pairs of high band ports covering 1710-2170 MHz and two pairs of low band ports covering 790-960 MHz, this compact CCI Bi-Sector provides the capability to deploy two high band beams (sectors) and two low band beams (sectors) in a single antenna. This antenna features 5° of Fixed Electrical Tilt (FET).

CCI's unique patented bi-sector technology provides optimized overlap between the pairs of asymmetric beams, lowers soft handover losses in LTE, UMTS/HSPA+ and CDMA/EVDO systems, while minimizing interference between sectors. Fast roll-off of each of the outer beams and high front-to-back ratios ensure reduced interference. This patented approach enhances data transfer rates within LTE, UMTS and EVDO network sectors and addresses “hotspots” in mobile wireless operator networks.

The single panel design of the Bi-Sector Array offers the opportunity to reduce antenna count and directly replaces an existing 65° antenna without mount changes and avoids costly leasing and zoning changes. The enhanced coverage matches the existing sector footprint and minimizes the need for optimization and adjacent site changes, providing operators with significant CAPEX and OPEX cost savings

CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • Delivers increased capacity and data-throughput for sites that are performance or capacity constrained
  • Provides a higher level of spectrum reuse making it an ideal solution for spectrum limited markets
  • Increase capacity without the need for new site builds or carrier adds and without using valuable spectrum resources
  • Large high capacity venues such as stadiums, special events with high traffic and Cell on Wheel (COW) deployments

Electrical

Ports 4 × Low Band Ports for 790-960 MHz 4 × High Band Ports for 1710-2170 MHz 
Frequency Range 790-862 MHz 880-960 MHz 1710-1880 MHz 1920-2170 MHz
Gain 12.5 dBi 13.0 dBi 14.0 dBi 15.0 dBi
Azimuth Beamwidth (-3dB) 32° Asymmetric 30° Asymmetric 31° Asymmetric 29° Asymmetric
Elevation Beamwidth (-3dB) 34.0° 30.0° 16.0° 14.0°
Electrical Downtilt
Elevation Sidelobes (1st Upper) < -16 dB < -14 dB < -13 dB < -14 dB
Front-to-Back Ratio @180° > 30 dB > 28 dB > 30 dB > 30 dB
Cross-Polar Port-to-Port Isolation > 20 dB > 20 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Input Power Continuous Wave (CW) 500 watts 500 watts 300 watts 300 watts
Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground

Mechanical

Dimensions (L×W×D) 24.7×28.5×9.4 in (627×723×240 mm)
Survival Wind Speed > 125 mph (> 201 kph)
Front Wind Load 141 lbs (626 N) @ 100 mph (161 kph)
Side Wind Load 50 lbs (222 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 5.5 ft2 (0.5 m2)
Weight * 33.0 lbs (15.0 kg)
Connector 8 × 7-16 DIN female long neck
Mounting Pole 2 to 5 in (5 to 12 cm)
Mounting Bracket 90° rotation allows both horizontal and vertical sectorization
* Weight excludes mounting
Bottom View  
  PI BSAD6515F00522 bottom with labels 20150710
Connector Spacing  
  BSAD6515F00522 BVDim

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
  BSAD6515F00522 AP AZ855 BSAD6515F00522 AP AZ855 EL5 
  855 MHz Azimuth 855 MHz Elevation 5° 

 

 

 

BSAD6515F00522 AP AZ1948  BSAD6515F00522 AP AZ1948 EL5
  1948 MHz Azimuth 1948 MHz Elevation 5°
 

Parts & Accessories

BSA-D65-15F005-22 Two foot (0.6 m) antenna, Bi-Sector Array, Multiband (800, 950, 1800, 1710/2110 MHz), Fixed Electrical Tilt
BSA-D65-15F005-22-K Complete kit with two foot antenna, and BSA-M05 adjustable mast bracket and MBC-01 mast bracket clamp
BSA-M05 Adjustable mast bracket kit with ±35° horizontal adjustment and ±55° vertical adjustment mechanical tilt 
MBC-01 Mast bracket clamp for mast mounting of BSA-M05

Standards & Compliance

Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001:2008
   
ISO9001Logo RoHS logo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax