Antenna Accessories

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Site Control Unit SCU-AISG2-P
                
       
       
         
  SCU AISG2 PFront  

 

CCI’s Portable AISG 2.0 Site Control Unit (SCU) is part of our suite of antenna products. This portable controller will enable operation of an AISG 1.1 or AISG 2.0 compliant device such as TMA’s or antennas with RETs. The Remote Tilt Antenna function enables optimization (tilts) of the sector coverage pattern. The SCU interfaces directly with the CCI Tilt Actuator mounted at the Antenna via coax. No home run or additional cable is required. The continuous adjustment capability allows changes to the BTS coverage to suit network optimization, changing traffic patterns or seasonal changes such as foliage absorption.
The Portable SCU can be controlled by a Laptop PC (with Driver and Software Application loaded from a CD-ROM) and is accessed via a USB 2.0 port. Additionally, the Portable SCU Supports AISG Device Software Download to the RET/TMA Device (via .bin or .hex file types). 

Technical Description

 

 

The Portable Site Control Unit (SCU) when paired with remote actuators from CCI allows a retrofit to existing Manual Tilt Antennas. The unit provides one RS485 fully AISG and 3GPP compliant control output. The SCU is controlled by Laptop PC via a USB 2.0 port. The SCU is portable, designed for Indoor environments and runs off 24VDC. The unit is fully lightning protected.
The SCU when used in conjunction with CCI Remote Electrical Tilt Actuators seamlessly integrates with the carriers existing BTS equipment to achieve the desired performance results.

 

Electrical Specifications

Input Voltage +24 VDC
Input current 1.75 A DC
Output Voltage +12 VDC or +24 VDC (Software Selectable - AISG Compliant)
Output Current Nominal ≤ 2.0A DC @ 12 VDC; = 1.75A DC @ 24 VDC
Max number of AISG devices 241  122
User Interface Driver and Application Software installed from CD-ROM to PC; access through USB Port
Interface to AISG Equipment RS 485 AISG 1.1, 2.0 compatible
Software Download Supports AISG Device Software Download to the RET/TMA Device(via .bin or .hex file types)
  1  The maximum number of devices (RET/TMA) connected may vary depending on the length of AISG Cable and the power consumption of each AISG device.
  2 The maximum number of RET Actuators connected when daisy chained and being used with BSA’s (Bi-Sector Arrays) may vary depending on the length of AISG Cable and the power consumption of each AISG device.

Indicators

Power Status Indicator RED LED
12V Indicator RED LED
TX Data Indicator YELLOW LED
RX Data Indicator YELLOW LED

Mechanical

AISG Connector Female 8 pin circular conn. per IEC60130-9 Ed. 3.0 w/screw ring locking
Number of AISG Ports 1 (RS485 port)
LAN Connectors 1 x Ethernet (RJ-45)
High Speed Serial Data Connector USB 2.0 × 1
DC Input Connector 2.0 mm DC Power Jack
Dimensions (W×H×D) 1.85×1.38×4.9 in.(47×35×125 mm)
Weight 3.5 lbs. (1.5 kg)

Environmental

Temperature range 0º to +131ºF (0º to +55ºC)
Protection Class IP20 Minimum
  SCU AISG2 PFrontview SCU AISG2 PRearview
  CCI Portable SCU Front View CCI Portable SCU Rear View

Block Diagram

  AISG Portable Block Diagram

Parts & Accessories

Part Number SCU-AISG2-P
Overall Weight 3.5 lbs (1.5 kg)

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US
 
AISGLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax