Antenna Accessories

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      AISG Cable Kit OPA-CBK-RA-AG-RRU
                
       
       
         
 

 

AISG Right Angle Cables

 

  • AISG 1.1 and 2.0 compliant control cables
  • Offset keying for right angle cables
  • IP67 outdoor ingress protection (when properly mated)
  • Flame retardant per UL 1581 VW-1
  • Matte polyurethane jacket (Black)
  • Connectors 2 x 8 pin (male/female) per IEC 60130-9
  • Tinned copper braid shield material

Overview

 

CCI's OctoPort antenna to remote radio unit (RRU) AISG Cable Kits provides all the required cables for the successful deployment of CCI’s OctoPort antennas and any CCI antennas with four Remote Electrical Tilt (RET) actuators. All of the control cables included in the kit are AISG 1.1 and AISG 2.0 compliant.

AISG control of the OctoPort's four high band ports covering 1710-2360 MHz, two low band ports covering 698-787 MHz and two low band ports covering 824-894 MHz, can be configured in several ways. Depending on your requirements, a single RRU can be designated as the AISG controller whereby it controls both the high band ports and low band ports of the antenna. Another configuration will allow a low band RRU to control the low band antenna ports and a high band RRU to control the high band ports of the antenna. The AISG cable kit provides all the necessary cables to enable both of the above configurations. The 10 foot AISG cables enable connection from the RRU to the antenna, while the 20” AISG cables are for daisy chaining between RET actuators.

 

Electrical Specifications

Individual Cable Part Number AISGC-MRA-FRA-20 AISGC-M-FRA-10FT
Cable style UL2464 UL2464
Protocol AISG 1.1 and AISG 2.0 AISG 1.1 and AISG 2.0
Maximum voltage 300 V 300 V
Rated current 5 A at 104° F (40° C) 5 A at 104° F (40° C)
 

Mechanical Specifications

Individual Cable Part Number AISGC-MRA-FRA-20 AISGC-M-FRA-10FT
Cables per kit
Connectors 2 x 8 pin IEC 60130-9
Right angle male/right angle female
2 x 8 pin IEC 60130-9
Straight male/right angle female
Tightening torque Hand tighten only ≈ 1.84 ft-lbs (2.5 Nm)  Hand tighten only ≈ 1.84 ft-lbs (2.5 Nm) 
Construction Shielded (Tinned Copper Braid) Shielded (Tinned Copper Braid) 
Braid coverage 85% 85%
Jacket Material Matte Polyurethane (Black) Matte Polyurethane (Black)
Conductors 1 twisted pair - 24 AWG
3 conductors - 19 AWG
AWM style 2464
1 twisted pair - 24 AWG
3 conductors - 19 AWG
AWM style 2464
Cable Diameter 0.307 in (7.8 mm) 0.307 in (7.8 mm)
Length 20 in (508 mm) 120 in (3048 mm)
Weight 0.23 lbs (0.10 kg) 0.77 lbs (0.35 kg)
Minimum bend radius 3.9 in (100 mm) 3.9 in (100 mm)
  AISG RA to RA and RA to Straight full offset final
  Right Angle to Right Angle and Right Angle to Straight Jumper Cable

Environmental Specifications

Individual Cable Part Number AISGC-MRA-FRA-20 AISGC-M-FRA-10FT
Temperature Range -40° to 80° C -40° to 80° C
Flammability UL 1581 VW-1 UL 1581 VW-1 
Ingress Protection IEC 60529:2001, IP67 IEC 60529:2001, IP67

Parts & Accessories

Kit Part Number OPA-CBK-RA-AG-RRU
Number of Cables 5
Overall Length 300 in (7690 mm)
Overall Weight 2.2 lbs (1.0 kg)
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax