Antenna Accessories

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      AISG Cable Kit CBK-RA-AG-RRU-001
                
       
       
         
 

 

AISG Right Angle Cables

 

  • AISG 1.1 and 2.0 compliant control cables
  • Offset keying for right angle cables
  • IP67 outdoor ingress protection (when properly mated)
  • Flame retardant per UL 1581 VW-1
  • Matte polyurethane jacket (Black)
  • Connectors 2 x 8 pin (male/female) per IEC 60130-9
  • Tinned copper braid shield material

Overview

 

CCI's Two RET antenna to remote radio unit (RRU) AISG Cable Kits provides all the required cables for the successful deployment of CCI’s  models that have larger Remote Electrical Tilt (RET) actuators spacing then normal. All of the control cables included in the kit are AISG 1.1 and AISG 2.0 compliant.

AISG control can be configured in several ways. Depending on your requirements, a single RRU can be designated as the AISG controller whereby it controls both the high band ports and low band ports of the antenna. Another configuration will allow a low band RRU to control the low band antenna ports and a high band RRU to control the high band ports of the antenna. The AISG cable kit provides all the necessary cables to enable both of the above configurations. The 10 foot AISG cables enable connection from the RRU to the antenna, while the 27" AISG cable is for daisy chaining between RET actuators.

Electrical/Mechanical/Environmental Specifications

  RET to RET Cables RRU to Antenna Cables
Individual Cable Part Number AISGC-MRA-FRA-27 AISGC-M-FRA-10FT
Cable style UL2464
Protocol AISG 1.1 and AISG 2.0
Maximum voltage 300 V
Rated current 5 A at 104° F (40° C)
Temperature Range -40° to 80° C
Flammability UL 1581 VW-1
Ingress Protection IEC 60529:2001, IP67
Tightening torque Hand tighten only ≈ 1.84 ft-lbs (2.5& Nm)
Construction Shielded (Tinned Copper Braid)
Braid coverage 85%
Jacket Material Matte Polyurethane (Black)

Conductors
1 twisted pair - 24 AWG
3 conductors - 19 AWG
AWM style 2464
Cable Diameter 0.307 in (7.8 mm)
Minimum bend radius 3.9 in (100 mm)

Connectors
2 x 8 pin IEC 60130-9
Right angle male/right angle female
2 x 8 pin IEC 60130-9
Straight male/right angle female
Length 27 in (686 mm) 120 in (3048 mm)
Weight 0.20 lbs (0.09 kg) 0.77 lbs (0.35 kg)
Cables per kit
1
2

Mechanical Specifications

  AISG RA to RA and RA to Straight full offset final
  Right Angle to Right Angle and Right Angle to Straight Jumper Cable

Parts & Accessories

Kit Part Number CBK-RA-AG-RRU-001
Number of Cables 3
Overall Length 267 in (6782 mm)
Overall Weight 1.7 lbs (0.8 kg)
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax