Antenna Accessories

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      RET Actuator BSA-RET200
                
       
       
         
 

BSA RET200Topview

BSA RET200Sideview

 

  • AISG 2.0/3GPP Protocol
  • RS-485 Interface
  • Daisy chaining capability
  • Software upgradeable
  • Rugged, weather resistant and highly reliable internal design
  • Interoperability Tested with all leading BTS Manufacturers

 

Overview

 

The Remote Electrical Tilt (RET) Actuator is part of Communication Component Inc.’s complete RET System. The RET Actuator enables optimization on a continuous basis of the sector coverage pattern. It provides an RS485 control interface which is AISG 2.0 compatible. The RET Actuator when used with a Site Control Unit (SCU) or an AISG Compliant BTS enables remote fine tuning of the Site footprint without requiring a tower climb. The continuous adjustment capability allows changes to the antenna downtilt pattern to suit network optimization, changing traffic patterns or seasonal changes such as foliage absorption.

The Remote Electrical Tilt (RET) Actuator from CCI consists of an RS485 control interface driving a DC motor with an encoder, which connects to the existing antenna phase shifter that controls downtilt of the antenna pattern. The RET Actuator when used in conjunction with a Site Control Unit (SCU) or an AISG Compliant BTS seamlessly integrates with the carriers existing BTS equipment to achieve the desired performance results. The Remote Electrical Tilt Actuator is designed for outdoor environments and runs off +10 to +30V. CCI’s RET Actuator is Interoperable with all leading BTS Manufacturers including Alcatel-Lucent, Ericsson, Huawei, Nokia Siemens and others.
CCI RET's are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

General Specifications

Part Number BSA-RET200
Protocols AISG 2.0
RET Type Type 1
Adjustment Cycles >10,000 cycles
Tilt Accuracy ±0.1°
Temperature Range -40° C to 70° C

Electrical

Data Interface Signal DC
Input Voltage 10-30 Vdc
Current Consumption Tilt 120 mA at Vin=24
Current Consumption Idle 55 mA at Vin=24
Hardware Interface AISG-RS 485 A/B
Input Connector Male 1 × 8 pin Daisy Chain
Output Connector Female 1 × 8 pin Daisy Chain

Mechanical

Dimensions (L×W×D) 8.0×5.0×2.0 in. (213×135×51 mm)
Housing ASA/ABS/Aluminum
Weight 1.7 lbs (0.75 kg)
ASA= Acrylic Styrene Acrylonitrile
ABS=Acrylanitrile Butadiene Styrene
  RETOutline

Product Information

Parts & Accessories

Part Number BSA-RET200
Overall Weight 1.7 lbs (0.75 kg)

Certifications

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24
Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US
     
ISO9001Logo ROHS Final AISGLogo
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax