Tower Mounted Amplifiers

CCI Portal Login

CCI Customer Portal

CCI Register

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      850MHz Twin Tower Mounted Amplifier DTMA850FGXX
                
       
       
         
  DTMA850FGXX FV  
  • Small, lightweight, twin unit
  • Dual duplexed
  • High Linearity
  • Lightning protected
  • High reliability
  • Full Cellular (25 MHz) band

 

Overview

 

CCI’s Twin TMA contains two TMA’s in a single housing.  Each TMA is full band and fully duplexed.  High linearity improves the uplink sensitivity and the receive performance of base stations.
The TMA supports CDMA, EDGE/GSM and UMTS BTS equipment.  It provides a convenient package for sites upgraded to dual or quad antenna configurations.  It provides a convenient package for sites using dual polarization antennas.  The twin TMA package reduces tower loading, leasing, and installation costs. Unit count on the tower is cut in half.  An excellent match for two branch receive diversity applications using dual polarization antennas. The input and output connectors are located inline for ease of installation in space constrained areas such as uni-pole structures and stealth antennas.

 

Technical Description:

The TMA system consists of a twin outdoor tower mount unit with two antenna inputs.  TMA Gain is to be Customer Specified at time of order over a range from 8 dB to 16 dB.  The tower mount unit is dual duplexed to separate the low-power uplink signal from the high-power downlink signal at the antenna port, amplifies the low-level uplink signal using an ultra-low noise amplifier (LNA), and recombines the two paths at the BTS port.  The tower mount units consist of six band-pass filters, four redundant low-noise amplifiers, bypass failure circuitry, and bias tee’s which are all housed in an IP65 moisture proof enclosure, with IP68 Immersion proof connectors suited to long-life masthead mounting.  The unit provides protection against lightning strikes via a multi-stage surge protection circuit.  DC power is provided via the feeder cable from the BTS.
An optional indoor power supply unit (PDU) is available to power up to six tower mount units and to provide all the monitoring and alarm functions for the system.  The PDU is housed in a single (1U) 1.75” x 19” rack and contains dual redundant power supplies capable of being “hot swapped” that provide a regulated DC supply voltage on the RF coax for the tower mount amplifiers.

Electrical

RF Parameters Ports Frequency(MHz) Specification
Return Loss ANT 824 - 849 18 dB min. (16 dB bypass mode)
869 - 894 18 dB min.
BTS 824 - 849 18 dB min. (16 dB bypass mode)
869 - 894 18 dB min.
Gain ANT - BTS 824 - 849 8 to 16 dB nominal (±0.5 dB) (Customer specified)
Insertion Loss ANT - BTS (RX Bypass mode) 824 - 849 1.7 dB typ. @ 25°C, 1.9 dB over temperature range (± 0.3 dB)
ANT - BTS (TX) 869 - 894 0.4 dB typ. (±0.1 dB)
Noise Figure ANT - BTS 824 - 849 1.5 dB typ. @ 25°C, 1.7 dB @ 55°C
Input Third Order Intercept Point ANT - BTS 824 - 849 +10 dBm min. at max. gain
General Characteristics  
Impedance 50 ohms
Continuous Average Power 200 W max.
Peak Envelope Power 2 kW max.
Intermodulation Performance(all ports) <-110 dBm (-153 dBc) typical (2 × +43 dBm tones) all bands
Operating Voltage +10V to +15V DC provided via coax
Operating Current  120 mA

Environmental

Operating Temperature   -40˚C to +55˚C
Enclosure IP65 (Unit Body), IP68 (Connector)
MTBF >500,000 hours
Lightning Protection 8/20us, ±10KA max, 10 strikes each per IEC61000-4-5

Mechanical

Connectors   4 × 7-16 DIN female
Dimensions (w/o connectors or brackets)(H×W×D) 10.6 × 7.9 × 3.3 in. (269 × 200 × 84 mm)
Dimensions (with brackets)(H×W×D) 14.3 ×8.4 × 3.6 in. (363 × 213 × 91 mm)
Weight 15.3 lbs (6.9 kg)-with bracket; 14.6 lbs (6.6 kg)-without bracket
Mounting Pole/Wall mounting bracket

 

   DTMA850FGXX Outline
  DTMA850FGXX Outline Drawing

 

Block Diagram

   DTMA850FGXX BD
  DTMA850FGXX Block Diagram

Accessories

PDU-1819-3DT Power Distribution and Alarm Unit
BT-0821-DMDF-AG-O DIN-Male RF Port, DIN-Female RF+DC+AISG Port
BT-0821-DFDM-AG-O DIN-Female RF Port, DIN-Male RF+DC+AISG Port
BT-0821-DFDF-AG-O DIN-Female RF Port, DIN-Female RF+DC+AISG Port

Parts & Accessories

DTMA850FGXX 850 Cellular Full band Fixed Gain Twin TMA

Gain XX
8 dB 08
9 dB 09
10 dB 10
11 dB 11
12 dB 12
13 dB 13
14 dB 14
15 dB 15
16 dB 16
Example:  DTMA850FG12 = 12 dB nominal gain

Certifications

Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US
 
 
  Footer
              
     
     
       
 

News

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax